Sunfire Radio manual Unpacking, Chapter, Remote Features

CHAPTER 1

Unpacking

Your Ultimate Receiver should reach you in perfect condition. If you do notice any shipping damage, please contact your SunÞre Dealer immediately.

Gently lift out the unit and remove all the packing material and acces- sories. It is important to save all the packing materials and the box in case your Ultimate Receiver ever needs to be moved or shipped for repair.

Make sure that you keep your sales receipt. It is the only way to establish the duration of your Limited Warranty and it may come in useful for insur- ance purposes.

Please take a moment to Þll out and mail the SunÞre Customer Response card. Also read the serial number located on the rear panel and record it here:

Serial #:

___________________________

Purchased at:

___________________________

___________________________

___________________________

___________________________

Date: _______________________

6

Features

•7 channels of power ampliÞcation

•200 watts rms per channel

(8 ohms, 20 Hz-20 kHz, < 0.5% THD)

•Fully automatic signal-sensing for audio and video input selection (NTSC only in the US, PAL-BGIH only for Export)

•Automatic video format transcod- er upconverts video sources to S and component video

•Dolby Digital EX®, Dolby Pro Logic IIx®, DTS ES® and DTS Neo:6® decoding modes

•Party mode allows two channel playback through all speakers

•DSP “simulated” surround mode for two channel sources

•DSP Holographic Imaging for unbelievable soundstage enhancement

•Direct 2-channel analog bypass mode

•7.1 channel outputs plus stereo side outputs for a total of 9.1 channels

•Surround Back speaker outputs may be used for a second zone or side axis speakers

•AM/FM tuner with 40 presets

•Gold plated inputs and outputs

•Six A/V inputs, each with audio, S-video and composite video

•Three A/V outputs, each with au- dio, S-video and composite video

•Three audio-only inputs, including MM Phono

•8 channel analog input with separate RCA connectors

•On Screen Display (OSD)

•Two Tape record outputs

•Can record a downmixed 2 channel output from a 5.1 digital source

•Three (100 MHz) component video inputs and two outputs

•Six coaxial and four optical digital inputs

•Coaxial and optical digital out- puts (including from analog and downmixed 5.1 sources)

•Three subwoofer outputs

•Flash memory upgradable through RS232 or CD

•IEEE 1394 (FireWire™) port for future expansion

•Treble and Bass tone controls

•RS-232 control port with discrete codes

•Trigger outputs for both zones

•IR control of both zones, with rear IR ports and discrete codes.

•Supports all digital sampling rates to 96 kHz

•24-bit Crystal Semiconductor® Analog to Digital converter

•24-bit, 192 kHz Analog Devices® Digital to Analog converters

•32-bit, 20 MHz control micro- processor and 24-bit, 150 MIPS Motorola SymphonyTM DSP pro- cessor

•IEC removable power cord

Remote Features

•Fully backlit

•Pre-programmed for most brands of A/V equipment

•Learns commands from your other remote controls

•Macro feature lets you program a sequence of control steps

•Operates up to ten components

•No memory loss when changing batteries

User's Manual