CHAPTER 1
Front Panel Features
1 | 2 | 3 | 4 | 5 | 6 |
SIGNAL PROCESSING
DOLBY | ZONE TWO | |
DIGITAL | POWER | |
DTS | ZONE TWO | |
ADJUST | ||
| ||
DOLBY | HOLOGRAPHIC | |
PRO LOGIC IIx | IMAGE | |
DIGITAL | ||
SOURCE | ||
|
POWER
Ultimate Receiver II
|
|
| Ultimate Receiver |
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
| ROTATION |
|
|
|
|
|
|
|
|
|
|
|
| MODE |
|
|
|
|
|
|
|
|
|
|
| DOWN | UP |
|
|
|
|
|
|
|
|
|
|
| ZONE | HOLOGRAPHIC |
|
|
|
|
|
|
|
|
|
|
| TWO | IMAGE |
|
|
|
|
|
|
|
|
|
|
| TREBLE | PANEL |
|
|
|
|
|
|
|
|
|
|
| DIM | |
|
|
|
|
|
|
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | +10 | SELECT |
|
|
|
|
|
|
|
|
|
|
|
| BASS | MUTE |
|
|
| MANUAL |
|
|
|
|
|
|
|
|
|
|
|
| TUNING |
|
|
|
|
|
|
|
|
|
AM/FM | DIRECT | DOWN |
|
| UP |
|
| DOWN |
|
| UP | FULL AUTOMATIC |
| TUNER CONTROLS |
| Sunfire |
| TONE CONTROLS |
| OPERATION | |||||
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| |||
LEVEL
MANUAL INPUT SELECTOR
7 8 9
1. Signal Processing
DOLBY DIGITAL
This light is on when a Dolby Digital signal is being decoded.
DTS
This light is on when a DTS signal is being decoded.
DOLBY PRO LOGIC IIx
This light is on when the Dolby Pro Logic IIx mode, or Dolby Pro Logic II mode is engaged.
DIGITAL SOURCE
This light is on when a Digital signal is being decoded.
ZONE TWO POWER
This light is on when Zone 2 is turned on.
ZONE TWO ADJUST
This light is on when Zone 2 is being adjusted.
HOLOGRAPHIC IMAGE
This light is on when the HOLO- GRAPHIC IMAGE "circuit" is engaged. (This is actually modeled in DSP).
SIDE AXIS
This light is on when the side axis outputs are enabled.
1011
2. IR Receiver Window
This window should be clean and free from obstruction for the remote control to work correctly.
3. Processor Display
This soothing blue display shows which input is selected, the tuner frequency, volume level, and other useful features.
4. Mode Buttons
MODE UP/DOWN
These buttons allow you to step up or down through the various sound playback modes.
ZONE TWO
Note: If Zone 2 has not been enabled (see page 36) this but- ton has no effect.
Any changes you make after pressing this, will affect Zone 2 and not the Main Zone. For ex- ample, press this and POWER to turn on Zone 2, then adjust the Volume and select an input. Press ZONE 2 again to revert back to Main Zone operation. It will also revert back after a short period of no activity.
12 13
TREBLE/BASS SELECT Use these buttons to select either the Treble or Bass for ad- justment using the UP/DOWN TONE controls (11).
HOLOGRAPHIC IMAGE Engage this "circuit" to add a three dimensional effect, espe- cially to stereo listening.
PANEL DIM
The front panel lights have four levels: bright, medium, low and off (low intensity display with amber LEDs off).
MUTE
This turns off the sound. Press it again, or adjust the volume control to return to the previous volume level.
5. Rotation
This light pulses when the front panel volume LEVEL or INPUT SELECTOR are being rotated, or when you are using the remote control.
10
User's Manual
