CHAPTER 4

Input Menus

Input ConÞguration Menus

MAIN MENU

TRIMS

MODES

TONE

INPUTS

SETTINGS

Input Menus

These menus let you select which input you would like to conÞgure. Pressing the joystick right on each input brings up a second menu which allows you to conÞgure what happens when each input is selected.

INPUTS

Name

Use the joystick up/down, and left/ right to change the display name for any input, up to 9 characters. Move fully left when Þnished.

Gain Trim

Use this to adjust all of your sources to play at similar levels. To prevent overloading, the levels can only be adjusted downwards.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD INPUT CONFIGURE

DVD

 

 

 

 

 

 

 

 

 

 

 

 

 

CD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NAME

DVD

 

 

SAT

 

 

 

 

 

 

 

 

 

 

 

 

 

GAIN TRIM

0.5 dB

VID1

 

 

 

 

 

 

 

 

DEFAULT MODE

LAST

VID2

 

 

 

 

 

 

 

 

VIDEO TYPE

AUTO

 

VCR

 

 

 

 

 

 

 

 

 

MAIN ZONE

ENABLE

 

 

 

 

 

 

 

 

 

 

 

 

 

FULL AUTO

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRIGGER RELAY

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ZONE 2

ENABLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUTS P2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TUNER PRESETS

 

 

 

 

 

 

 

 

 

 

TAPE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PHONO

 

 

 

 

 

 

 

8-CH INPUT CONFIGURE

 

 

8-CHANNEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NAME

8-CHANNEL

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GAIN TRIM

0 dB

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LOCK TO VID

VID1

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MAIN ZONE

ENABLE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TRIGGER RELAY

ON

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: The 8-Channel input menu is slightly different from the other menus:

It allows you to select a speciÞc video input whenever the 8-Chan- nel audio input is selected. Also, this input only works in the Main Zone, not Zone 2.

Default Mode

Set the input to a favorite surround mode, or the last mode, or stereo.

Video Type

If you know the type of video used for each input, select the type from CVID (composite), SVID (S-video) or COMP (component). Otherwise, choose AUTO, and the Receiver will automatically detect the source type when a video signal is pres- ent. There maybe some delay in Auto, for certain program material.

Main Zone

Enable/disable the selected input in the Main Zone. You can disable any unused inputs then they will not play in the Main Zone.

Full Auto

Select on, and the Receiver will turn on and select this input when- ever this input starts to play. Select off for any input which hinders full- auto operation.

Trigger Relay

The Trigger Relay can be set to turn on whenever the input is se- lected. This could be used to turn on an ampliÞer or a video screen for example.

Zone 2

Enable/disable the input in Zone 2. You can select the inputs you wish to play in Zone 2. For example, you might disable the Phono input if nobody in Zone 2 appreciates your vintage collection of 78s.

34

User's Manual

Page 34
Image 34
Sunfire Radio manual Input Menus, Input ConÞguration Menus