Sunfire Radio manual Safety Instructions

SAFETY

Safety

Instructions	8. Power Sources — The Component
	should be connected to a power sup-
1. Read Instructions -– All the safety	ply only of the type described in these
	operation instructions or as marked on
and operation instructions should be	the Component.
read before the SunÞre Component is	9. Power Cord Protection — Power-
operated.
2. Retain Instructions — The safety	supply cords should be routed so that
	they are not likely to be walked upon
and operating instructions should be	or pinched by items placed upon or
kept for future reference.	against them, paying particular at-
3. Heed Warnings — All warnings on	tention to cords at plugs, convenience
	receptacles, and the point where they
the Component and in these operating	exit the Component.
instructions should be followed.
	10. Cleaning — The Compo-
4. Follow Instructions — All operat-
	nent should be cleaned only as
ing and other instructions should be	recommended in this manual.
followed.
	11. Non-use Periods—The power
5. Water and Moisture — The
	cord of the Component should be un-
Component should not be used near	plugged from the outlet when unused
water - for example, near a bathtub,
	for a long period of time.
washbowl, kitchen sink, laundry tub, in
a wet basement, or near a swimming	12. Object and Liquid Entry — Care
pool, etc.	should be taken so that objects do not
6. Ventilation — The Component	fall into and liquids are not spilled into
	the inside of the Component.
should be situated so that its location
or position does not interfere with its
proper ventilation. For example, the
Component should not be situated on
a bed, sofa, rug, or similar surface that
may block any ventilation openings; or
placed in a built-in installation such as
a bookcase, cabinet, or closed equip-
ment rack that may impede the ßow of
air through ventilation openings.
7. Heat — The Component should be
situated away from heat sources such
as radiators, or other devices which
produce heat.

13. Damage Requiring Service

—The Component should be serviced only by qualiÞed service personnel when:

A. The power-supply cord or the plug has been damaged; or

B. Objects have fallen, or liquid has spilled into the Component; or

C. The Component has been exposed to rain; or

D. The Component does not appear to operate normally

or exhibits a marked change in perfor- mance; or

E. The Component has been dropped, or its cabinet damaged.

14.Servicing — The user should not attempt to service the Component beyond those means described in this operating manual. All other servicing should be referred to qualiÞed service personnel.

2

User's Manual