Mitsumi electronic WD3300U Specifications, Replacement part option/not included in the box

Specifications

The specifications and outside appearance of the projector are subject to change without prior notice.

Type		DLP™ projector
Model		WD3300U
Display technology		0.65-inch Single chip DMD
		Pixel 1280 x 800 = 1024000 pixels
Projection lens		F 2.0 - 2.4 f= 24.5 - 33.1 mm
Light-source lamp		330 W
Image size (projection distance)		40” min. to 300” max. (projection distance 1.5 to 11.4 m)
Maximum resolution	Computer signal	Maximum resolution: 1600 x 1200 dots (compressed)
		Panel resolution: 1280 x 800 dots
	Video signal	NTSC/PAL/SECAM/4.43NTSC/PAL-M/PAL-N/PAL-60
	Component signal	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
		Panel resolution: 1280 x 800 dots
Computer/component video input		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
		Analog RGB	5 BNC	1
		Digital RGB	DVI-D 24-pin	1
Video input		[Signal type]	[Terminal type]	[Line]
		Video input	RCA / BNC	1
		S-video input	S / 2 BNC	1
Audio input		[Signal type]	[Terminal type]	[Line]
		RGB/Component	Stereo mini jack (ø3.5)	2
		Digital RGB	Stereo mini jack (ø3.5)	1
		Video	RCA (L, R)	1
		S-video	RCA (L, R)	1
HDMI input		[Signal type]	[Terminal type]	[Line]
		HDMI	HDMI 19-pin	1
Monitor output		[Signal type]	[Terminal type]	[Line]
		Analog RGB	Mini D-SUB 15-pin	1
Audio output		[Signal type]	[Terminal type]	[Line]
		RGB/Component	Stereo mini jack (ø3.5)	1
Speaker		10 W Mono Round type ø4.5 cm x 1
Control terminal/others		RS-232C (D-SUB 9-pin), USB, LAN (RJ-45), REMOTE IN/OUT
Operating temperatures		+41°F (+5°C) to +95°F (+35°C)
Rated voltage		AC 100 - 240 V, 50/60 Hz
Power consumption		4.5 A, 430 W
		During standby:
		AC 100 - 120 V: 2 W (when STANDBY MODE is STANDARD)
			0.4 W (when STANDBY MODE is LOW)
		AC 220 - 240 V: 2 W (when STANDBY MODE is STANDARD)
			0.6 W (when STANDBY MODE is LOW)
Dimensions (not includeing protrusion)		450 mm (W) x 187 mm (H) x 373 mm (D) (projector only)
		450 mm (W) x 187 mm (H) x 468 mm (D) (including the terminal cover)
Weight		10.3 kg (projector only), 10.5 kg (including the terminal cover)
Others	S-video input	Luminance signal: Vp-p=1.0 V 75 Ω (negative sync)
		Chrominance signals: Vp-p=0.286 V 75 Ω (burst signal)
	Video input	Vp-p=1.0 V 75 Ω (negative sync)
	Component video	YCBCR: Vp-p=1.0 V 75 Ω (Y) (negative sync)
	input	Vp-p=0.7 V 75 Ω (CB, CR)
	Analog input	RGB: Vp-p=0.7 V 75 Ω (negative sync)
		YCBCR: Vp-p=1.0 V (Y) (negative sync) Vp-p=0.7 V (CB, CR)
		HD/CS: TTL-level (negative or positive polarity)
		VD: TTL-level (negative or positive polarity)
	Digital input (DVI)	DVI-D interface (TMDS single link) with HDCP
	Digital input (HDMI)	HDMI interface (TMDS single link) (Only PCM audio is supported.)
	Audio input	350 mVrms, 10 kΩ or more
	DC OUT	5 V 1.5 A (max)

Replacement part (option/not included in the box)

Spare lamp: VLT-XD3200LP

Option lenses: OL-XD2000SZ, OL-XD2000LZ, OL-XD2000TZ, OL-XD2000FR

EN-49