Mitsumi electronic WD3300U Viewing video images continued, Projector + DVD player or HDTV decoder

Viewing video images (continued)

Projector + DVD player or HDTV decoder

Some DVD players have an output connector for 3-line fitting (Y, CB, CR). When connecting such DVD player with this projector, use the COMPUTER/COMPONENT VIDEO IN-2 terminals.

	BNC cable (option)
G B R		COMPUTER/COMPONENT
		VIDEO IN-2
	BNC-RCA connector (option)
Y CB(PB) CR(PR)
	Audio cable (option)	AUDIO IN-2
DVD player or HDTV decoder	To audio output terminals

•The terminal’s names Y, PB, and PR are given as examples of when a HDTV decoder is connected.

•The terminal’s names vary depending on the connected devices.

•Use BNC cables for connection.

•Image may not be projected correctly with some DVD players.

•If colors aren’t displayed correctly when the projector is connected to a high-definition video device having R, G, and B output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu. (See page 32.)

Connecting to video equipment having a HDMI terminal or DVI-D terminal

You can project high-quality images by connecting the COMPUTER/COMPONENT VIDEO DVI-D IN (HDCP) terminal of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD players.

•HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital video data for the purpose of copy protection.

• HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer electronics devices incorporating the DVI standards.

•This projector can be linked with video devices equipped with HDMI output terminal or DVI-D output terminal. However, with some of them, this projector may not display any image or not operate correctly.

•If this projector doesn’t display any image or not operate correctly, see the operation manual of the video device for its connection.

•Use of a long cable may decrease the quality of projected images.

Connection (for video equipment having an HDMI terminal)

•Use a commercially available HDMI (with HDMI logo) cable.

•You don’t have to connect any cable for audio input. You can input video and audio using an HDMI cable only.

•When HDMI audio isn’t output, it may be output by turning off the power of the video equipment with the projector and the video equipment connected to each other and then turning back on the power.

•Some cables may not be connected correctly depending on the size and shape of their connectors.

Equipment having an

HDMI terminal

To HDMI terminal

HDMI IN

HDMI (with HDMI logo) cable (option)

EN-21