Mitsumi electronic WD3300U user manual Menu operation continued, EN-30, INSTALLATION menu

Menu operation (continued)

INSTALLATION menu

opt. opt.

INSTALLATION		INSTALLATION
LAMP MODE	STANDARD	LENS LOCK

STANDBY MODE	STANDARD	ZOOM/FOCUS	OFF
		LOCK
AUTO POWER	OFF	LENS SHIFT LOCK	OFF
ON
AUTO POWER	OFF	LENS SHIFT	OK
OFF		RESET
IMAGE CAPTURE	GO

ON	SPLASH SCREEN	ON
	BACK COLOR	BLUE
	AV MUTE MODE	BLACK
	IMAGE REVERSE	OFF
	LENS LOCK	OK

ITEM	SETTING	FUNCTION
LAMP MODE	STANDARD	Select this option when you want to view images in a well-lit room.
	LOW	Select to moderate the intensity of the lamp. The operating sound is reduced
		and the lamp lifetime becomes longer.
STANDBY MODE	STANDARD	Select this option when you control the projector via LAN during power
		standby.
	LOW	Select this option when you don’t control the projector via LAN during power
		standby. This option disables the LAN terminal and reduces the power
		consumption during the power standby.
AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.

•The projector is in the stand-by mode when the lamp is off. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF / 5-60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
IMAGE CAPTURE	GO	Use to capture the screen for the splash screen. (See page .37.)
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.

•The splash screen can be changed. (See page 37.)

BACK COLOR	BLUE / BLACK /	Use to select the background from among BLUE, BLACK and IMAGE, which
	IMAGE	will be displayed when there is no signal input from the source. When IMAGE
		is selected, the splash screen will be displayed.
AV MUTE MODE	BLACK / IMAGE	Use to choose the background, either BLACK, or IMAGE, which will be
		displayed when the AV MUTE button is pressed. When IMAGE is chosen, the
		splash screen will be displayed.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on the
		ceiling.
LENS LOCK	OK	The LENS LOCK menu is displayed for the following settings.
ZOOM/FOCUS LOCK	ON / OFF	Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
LENS SHIFT LOCK	ON / OFF	Use to enable or cancel the LENS SHIFT LOCK.
LENS SHIFT RESET	OK	Use to reset the position of the lens to the factory setting.

•Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about 1 minute after turn-on.

•When the lamp mode is switched, the projected image may flicker.

•Frequent switching of the lamp mode may damage the lamp.

•You can’t set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to

SPLASH ID SCREEN to enable the password lock.

•When you continue projection for a long time with BACK COLOR or AV MUTE MODE set to IMAGE, an afterimage may persist on the screen. Consult your dealer in this case.

EN-30