Mitsumi electronic WD3300U user manual Menu operation continued, EN-31, FEATURE menu

Menu operation (continued)

FEATURE menu

opt.

FEATURE

ASPECT	NORMAL (FULL)
PASSWORD	DISPLAY INPUT
FUNCTION
MENU POSITION	1.

	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO

	SETUP	AUTO
	SCART INPUT	OFF
A Ë	LANGUAGE	English
	RESET ALL	OK

ITEM	SETTING		FUNCTION
ASPECT	NORMAL (FULL)		Input video signal is displayed at the max height (800 pixels) or max width
			(1280 pixels) of the panel while its aspect ratio is maintained.
	NORMAL (16:9)		Select this setting when using a 16:9 screen.
	NORMAL (4:3)		Select this setting when using a 4:3 screen.
	16:9		Regardless of the type of input signal, image is displayed at 16:9 aspect ratio
			(1280 x 720 pixels). Select to expand squeezed (or horizontally compressed)
			images such as DVD images to 16:9. Press the ENTER button to select
			whether or not to display signals at 16:9 depending on their type. (See page
			19.)
	REAL		Input video signal is displayed at its original pixel size.
	FULL		Select to project images in full size (1280 x 800 pixels) irrespective of type of
			input signal.
PASSWORD	DISPLAY INPUT	/	Use to enable or cancel the password lock. See page 38 for details.
FUNCTION	MENU ACCESS	/
	SPLASH ID SCREEN
MENU POSITION	1 (upper left) / 2 (lower right)		Use to change the position of the menu.
CINEMA MODE	AUTO		The film mode will be automatically activated when a film source signal is
			input.
			Select AUTO for normal use.
			When flicker occurs on the screen, frame dropping or other incorrect display
			occurs, or jaggies on slanting lines are remarkable, select either FILM or
			VIDEO, which improves the symptom better.
	FILM		Fixed to the film mode.
	VIDEO		The film mode will not be activated.
VIDEO SIGNAL	AUTO / NTSC / PAL /		When AUTO is selected, the appropriate video format is automatically
	SECAM / 4.43NTSC / PAL-		selected depending on the input signal. If the image isn’t displayed correctly,
	M / PAL-N / PAL-60		select the desired video format manually.
SETUP	AUTO		Select to change the SETUP mode automatically.
	OFF		Select to make black lighter.
	3.75% / 7.5%		Select to make black thicker.

•When 7.5% is chosen, the brightness is decreased by the set-up cancel function for the U.S. Choose OFF when the image is dark.

SCART INPUT	ON / OFF					Choose ON when connecting the projector with a device equipped with the
						SCART terminal that can output RGB signal. SCART terminal is used mainly
						in Europe. Choose OFF normally. (Available only for the input signal from the
						COMPUTER/COMPONENT VIDEO IN-1 terminal.)
LANGUAGE			/ English / Español /			Use to select the language used in the menus.
	Deutsch / Français / Italiano
	/	/		/	/
	PORTUGUÊS / SVENSKA /
	POLSKI
RESET ALL	OK					Use to reset the settings of the menu (excluding IMAGE CAPTURE,
						PASSWORD FUNCTION and LANGUAGE) to the factory setting values.

•CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.

•When SCART INPUT is set to ON, nothing is output to the external monitor.

•When SCART INPUT is set to ON, normal computer signals aren’t projected.

•Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped with the SCART terminal.

•Some AV devices equipped with the SCART terminal aren’t compatible with this projector.

EN-31