Menu operation (continued)
Menus displayed in the DETAIL MENU mode
IMAGE menu
opt. | opt. |
IMAGE |
| IMAGE |
|
COLOR | AUTO | ADVANCED MENU |
|
ENHANCER |
| ||
|
|
| |
CONTRAST | 0 | NOISE REDUCTION | ON |
BRIGHTNESS | 0 | CTI | ON |
COLOR TEMP. | STANDARD | INPUT LEVEL | 0 |
COLOR | 0 |
|
|
TINT | 0 |
|
|
SHARPNESS0
ADVANCED MENU | OK |
ITEM | SETTING | FUNCTION | ||||
COLOR ENHANCER | AUTO | Select to optimize the settings automatically depending on the input signal. | ||||
|
|
|
|
|
| (Select this option for normal use.) |
| PRESENTATION | Select to make the displayed image look bright and crisp. | ||||
| STANDARD | Select to make the displayed image look natural. | ||||
| THEATER | This option, suitable for viewing movies, makes the displayed image look soft | ||||
|
|
|
|
|
| and smooth. |
| sRGB | Select to give priority to the color reproducibility. | ||||
| USER |
|
| Select to set the gamma curve, set BrilliantColor™ or adjust the color | ||
|
| |||||
|
|
|
|
|
| intensity or color balance as desired. (See page 34.) |
CONTRAST | ±30 |
|
|
| Use to adjust the contrast of the projected image. (See page 33.) | |
BRIGHTNESS | ±30 |
|
|
| Use to adjust the brightness of the projected image. (See page 33.) | |
COLOR TEMP. | STANDARD / LOW / | Select from the predetermined color temperatures. | ||||
| HIGH |
| ||||
| USER |
|
| Use to adjust the color temperature to a desired value. (See page 34.) | ||
COLOR | ±10 |
|
|
| Use to adjust the color thickness of the projected image. (See page 33.) | |
TINT | ±10 |
|
|
| Use to adjust the color tint of the projected image. (See page 33.) | |
SHARPNESS | ±5 |
|
|
|
| Use to adjust the sharpness of the projected image. (See page 33.) |
ADVANCED MENU | OK |
|
| The ADVANCED MENU is displayed for the following settings. | ||
NOISE REDUCTION | ON / OFF | Use to reduce noise and roughness in the image when noisy video signal is | ||||
|
|
|
|
|
| input. |
CTI | ON / OFF | Use to correct smeared color boundaries. | ||||
INPUT LEVEL | ±5 |
|
|
|
| For analog signal input: |
|
|
|
|
|
| The input level of video signal differs among devices to be connected. High |
|
|
|
|
|
| input level causes solid white in displayed image and low input level causes |
|
|
|
|
|
| displayed image to get dark. Use this menu to adjust the input level of analog |
|
|
|
|
|
| video signal. |
| ENHANCED / | For digital signal input: | ||||
| NORMAL | When a digital signal is input, ENHANCED and NORMAL are switchable. (See | ||||
|
|
|
|
|
| page 22.) |
•When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can’t be adjusted.
•When the setting of COLOR ENHANCER is changed, the displayed image may be disturbed.
•When the COMPUTER1, COMPUTER2, DVI or HDMI is selected as the input source, COLOR and TINT can’t be adjusted.
•TINT is available only when the NTSC signal is input.
•INPUT LEVEL is unavailable when the digital signal is supplied from the YCBCR/YPBPR terminal of the connected device.
