Error Messages, References | Sharp MD-MT866H manual

References

– Error Messages –

50

Error Messages

ERROR MESSAGES		MEANING		REMEDY
BATT EMPTY		● The battery is run down.		● Charge the rechargeable battery or replace the alkaline bat-
(LoBATT)				tery (or use the AC adaptor for power).
BLANK MD		● Nothing is recorded.		● Replace the disc with a recorded disc.
(BLANK)
Can’t COPY		● You tried to record from a copy prohib-		● Record using the analogue cable.
(Can’tC)		ited MiniDisc.
Can’t EDIT		● A track cannot be edited.		● Change the stop position of the track and then edit it.
(Can’tE)
Can’t READ *		● The disc data cannot be read because the		● Reload the disc.
(Can’tS)		disc is damaged.		● Replace it with another recorded disc.
(Can’tT)
(Can’tU)
Can’t REC		● Recording cannot be performed correctly		● Re-record or replace it with another recordable disc.
(Can’tR)		due to vibration or shock.
Can’t STAMP		● Stamp function does not work.		● Check the number of tracks.
Can’t WRITE		● Cannot save the TOC information correctly		● Replace the disc with another recordable disc.
(Can’tW)		to a MiniDisc. (A large portion of the disc
		has been damaged.)
CHARGEmode		● The Charge/Operation switch is not set to		● Set the Charge/Operation switch to the operation mode.
		the operation mode when using this unit
		with the AC adaptor.
DEFECT		● The disc is scratched.		● If the sound you hear is not right, record again.
(DEFECT)				● Replace the disc with another recordable disc.
DISC FULL		● The disc is out of recording space.		● Replace it with another recordable disc.
Er-MD **		● The microprocessor has reported a sys-		● To have it repaired, go to the distributor where you purchased
(ErMD*)		tem fault and the unit is out of order.		the unit.
HOLD		● The unit is in the hold mode.		● Return the HOLD switch to its original position.
(HOLD)
LOCKED		● You removed a MiniDisc whilst recording		● Turn off the power and remove the MiniDisc.
(Can’tLOCK)		or editing.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 50

Sharp MD-MT866H operation manual Error Messages, References

Contents

MD-MT866H Thank you for purchasing this Sharp product Accessories Contents Special Notes Special NotesImportant Introduction Introduction Avoid using or leaving the unit in the following places PrecautionsPrecautions Storing the unit Names of Controls and Indicators Main unit Important Introduction Names of Controls and Indicators Main unit display panel Indicators Remote control unitRemote control display panel Names Face the top Charge Toward you Mode Battery ChargerBattery- Charger Names Setting Removing How to use the Charge / Operation switchBattery For use with the AC adaptor Charging Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery Display Conditions PowerAbout the liquid crystal display LCD About charging time Operation mode Using with the AC AdaptorUsing with Source Open Press Release Lock Hold Function Hold FunctionPreparation Inserting a MiniDisc Inserting a MiniDisc You can record your favorite CDs or tapes to an MD ConnectionsConnections To the DC in 5V socket To the Optical Line in socket To the Optical Line in socket To the DC50/60Hz 5V socket To the wall socket Before Recording RecordingBasic Operation Recording +12 -12dB Press the REC buttonDigital recording To stop recording To update the recorded contents of the MiniDiscTo interrupt recording About the TOC Recording Helpful tip when attaching a labelOperation Basic Playback PlaybackBasic Before Playing back Bass control Volume controlTo turn off the power To interrupt playback Advanced Playback To locate the beginning of a track To interrupt fast playback Useful Features Advanced PlaybackRandom play or repeat play To return to normal playback Advanced Recording Long-play recording monaural recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Start recording Press the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recording Recording tracks as a single track When a recording is paused or whilst recording…To create your own track numbers You can create your own track numbers at any point About track numbers About sampling rate converter Recording from a Microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc To record from a microphone Recording from a Microphone During a mic manual recording UsefulTrack intervals During a mic synchro recording To check the elapsed time and remaining time of the track Useful Features Checking DisplaysChecking Displays During playback, press the Disp button Track number and track name To display the playing time of an indiVidual track Press the Disp button to display the play Default Settings Changing Default SettingsFeatures Changing Beep sound Display backlight on the remote controlAuto power save Auto play MiniDisc Titling a MiniDiscAdvanced Titling a To enter a space Characters symbolsTo erase a character To add characters Stamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? Before stamping Operation of the MiniDisc for stamping Editing a Recorded MiniDisc Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again To erase tracks one at a time Press the Edit button repeatedly to select Divide To divide a trackTo combine tracks Press the Edit button repeatedly to select Combine To move a track White Red AD-CA55X Rechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play Symptom Limitations MiniDisc System Limitations References Error MessagesError Messages No Signal Tr. Protect Troubleshooting Troubleshooting If trouble occurs MaintenanceMaintenance Moisture condensation Specifications Specifications Signal readout DimensionsWeight Error correction Sharp Corporation