Manuals / Sharp / Home Audio / CD Player

Sharp MD-MT866H operation manual Using with the Rechargeable Battery, Charging, Charge mode

Models: MD-MT866H

1 56

Download 56 pages 1.14 Kb

Page 12

Image 12

Using with the Rechargeable Battery

Power Source – Using with the Rechargeable Battery –

Do not force the battery cover open too far.

Charge mode

AC 230-240V 50/60Hz

To the DC IN 5V socket

Charging

When the rechargeable battery is used for the first time or when you want to use it after a long period of disuse, be sure to charge it fully.

1 Insert the rechargeable battery.

2 Move the Charge/Operation switch to charge mode.

3 Place the portable MD into the battery charger and connect the AC adaptor.

●After the rechargeable battery is charged or used, it will get slightly warm. This is normal.

●When the portable MD is turned on or operating, the battery will not be charged.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Page 12

Image 12

Sharp MD-MT866H Using with the Rechargeable Battery, Charging, Charge mode, Insert the rechargeable battery

Contents

PORTABLE MINIDISC RECORDER MODEL OPERATION MANUALMD-MT866H Thank you for purchasing this SHARP productAccessories NotesContents Power SourceUseful Features Advanced FeaturesSpecial Notes Important IntroductionNOTES FOR USERS IN THE U.K. AND IRELAND Introduction DEUTSCHFRANÇAIS This equipment complies with the requirements ofPrecautions – Precautions –Important Introduction Storing the unitNames of Controls and Indicators Main unitNames of Controls and Indicators continued Main unit display panelRemote control unit Remote control display panelIndicators 1 2 3 4Battery Charger ImportantIntroductionFace the top ChargeHow to use the Charge / Operation switch BatteryRemoving For use with the AC adaptorUsing with the Rechargeable Battery 1 Insert the rechargeable battery2 Move the Charge/Operation switch to charge mode ChargingPower ITALIANOUsingFRANÇAIS ESPAÑOLUsing with the AC Adaptor SourcePower 1 Place the portable MD to the battery chargerPower Insert a alkaline battery into the batteryDEUTSCHable battery is inserted Attach the battery case to the portable MDHold Function PreparationMove the HOLD switch to the safety position To cancel the hold modeInserting a MiniDisc PreparationInserting a MiniDisc – 2 Lift it up 3 Insert a MiniDisc as shownConnections PreparationAUDIO OUT AC 230-240V50/60Hz To the wall socketPreparation To the DC IN50/60Hz 5V socketRecording Basic Operation – Recording –Before Recording 1 Press the REC button Analogue recordingDigital recording Recording continued To update the recorded contents of the MiniDiscTo interrupt recording Press the 06 buttonOperation Helpful tip when attaching a labelRecording – Basic –Playback BasicOperation Before Playing backTo turn off the power OperationBasic 3 Insert a MiniDisc page 4 Press the 06 buttonAdvanced Playback For audible fast forwardFor audible fast reverse To move to the beginning of the next trackDuring playback, press the MODE button repeat edly to select the playback modeRandom play Repeat play of all of the tracksAdvanced Recording Useful Features – Advanced Recording –1 Press the REC button To interrupt recordingUseful Features – Advanced Recording – Long-playrecording monaural recording2 Start recording Advanced Recording continued Useful Features – Advanced Recording –To start recording from the middle of a track 2 Press the REC buttonUseful Features – Advanced Recording – When a recording is paused or whilst recording…To create your own track numbers Recording tracks as a single trackAdvanced Recording continued About track numbersAbout sampling rate converter Note for digital recordingRecording from a Microphone To write recorded contents on the MiniDisc2 Insert a recordable MiniDisc page 3 Press the REC buttonRecording from a Microphone continued Useful Features – Recording from a Microphone –1 Press the REC button About pause functionUseful During a mic manual recordingChanging intervals between tracks During a mic synchro recordingChecking Displays battery level The remaining amount of battery level is shownby the battery indicator shuttle switch to 5 or 4 to display theChanging Default Settings Features3 Press the MODE button to switch items UsefulFeatures UsefulBeep sound Titling a MiniDisc AdvancedDisc name Track nameFeatures Advanced1 Put the unit in the character input mode Perform steps 1 - 2 on pageTitling a MiniDisc continued Master MiniDisc operationFeatures 1.What is a master MiniDisc?Operation of the MiniDisc for stamping FeaturesAdvanced 6 Load a MiniDisc for stampingAdvanced Features Editing a Recorded MiniDiscTo erase all of the tracks at once 5 To erase other tracks, repeat steps 1 -Advanced Features To divide a trackTo combine tracks – Editing a Recorded MiniDisc –Editing a Recorded MiniDisc continued Advanced Features5 Press the right shuttle switch toward 3 Press the right shuttle switch towardFeatures AdvancedListening through a stereo system Listening through a car stereoOther Features and Caution References – Other Features and Caution –Rechargeable battery Resuming auto playMiniDisc System Limitations ReferencesError Messages ReferencesReferences MEANINGTroubleshooting TroubleshootingReferences Maintenance Cleaning– Maintenance – ReferencesSpecifications – Specifications –References References TERMS OF GUARANTEE SHARP ELECTRONICS U.K. LTDSHARP CORPORATION