Manuals / Sharp / Home Audio / CD Player

Sharp MD-MT866H operation manual Operation, Helpful tip when attaching a label, Recording, Basic

Models: MD-MT866H

1 56

Page 23

To prevent recorded MiniDiscs from be- ing erased accidentally

Slide the accidental erase prevention tab, located on the side of the MiniDisc, in the direction indi- cated by the arrow.

●The MiniDisc will then be protected against accidental erasure.

Helpful tip when attaching a label

When attaching a label to an MiniDisc cartridge, be sure to note the following. If the label is not attached properly, the MiniDisc may jam inside the unit and it may not be pos- sible to remove it.

●If the label peels off or partially lifts

away, replace it with a new one.

● Do not put a new label on top of an existing one.

●Attach the label only in the specified location.

Recording –

Operation

Recordable Recording

prevented

To add a recording to such a MiniDisc, slide the acci- dental erase prevention tab back to its original position.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Basic –

Page 23

Image 23

Sharp MD-MT866H operation manual Operation, Helpful tip when attaching a label, Recording, Basic

Contents

Thank you for purchasing this SHARP product PORTABLE MINIDISC RECORDER MODELOPERATION MANUAL MD-MT866HNotes AccessoriesAdvanced Features ContentsPower Source Useful FeaturesNOTES FOR USERS IN THE U.K. AND IRELAND Special NotesImportant Introduction This equipment complies with the requirements of IntroductionDEUTSCH FRANÇAISStoring the unit Precautions– Precautions – Important IntroductionMain unit Names of Controls and IndicatorsMain unit display panel Names of Controls and Indicators continued1 2 3 4 Remote control unitRemote control display panel IndicatorsCharge Battery ChargerImportantIntroduction Face the topFor use with the AC adaptor How to use the Charge / Operation switchBattery RemovingCharging Using with the Rechargeable Battery1 Insert the rechargeable battery 2 Move the Charge/Operation switch to charge modeESPAÑOL PowerITALIANOUsing FRANÇAIS1 Place the portable MD to the battery charger Using with the AC AdaptorSource PowerAttach the battery case to the portable MD PowerInsert a alkaline battery into the batteryDEUTSCH able battery is insertedTo cancel the hold mode Hold FunctionPreparation Move the HOLD switch to the safety position2 Lift it up 3 Insert a MiniDisc as shown Inserting a MiniDiscPreparation Inserting a MiniDisc –AC 230-240V50/60Hz To the wall socket ConnectionsPreparation AUDIO OUT5V socket PreparationTo the DC IN 50/60HzBefore Recording RecordingBasic Operation – Recording – Digital recording 1 Press the REC buttonAnalogue recording Press the 06 button Recording continuedTo update the recorded contents of the MiniDisc To interrupt recordingBasic – OperationHelpful tip when attaching a label Recording –Before Playing back PlaybackBasic Operation3 Insert a MiniDisc page 4 Press the 06 button To turn off the powerOperation BasicTo move to the beginning of the next track Advanced PlaybackFor audible fast forward For audible fast reverseRepeat play of all of the tracks During playback, press the MODE button repeatedly to select the playback mode Random playTo interrupt recording Advanced RecordingUseful Features – Advanced Recording – 1 Press the REC button2 Start recording Useful Features – Advanced Recording –Long-playrecording monaural recording 2 Press the REC button Advanced Recording continuedUseful Features – Advanced Recording – To start recording from the middle of a trackRecording tracks as a single track Useful Features – Advanced Recording –When a recording is paused or whilst recording… To create your own track numbersNote for digital recording Advanced Recording continuedAbout track numbers About sampling rate converter3 Press the REC button Recording from a MicrophoneTo write recorded contents on the MiniDisc 2 Insert a recordable MiniDisc pageAbout pause function Recording from a Microphone continuedUseful Features – Recording from a Microphone – 1 Press the REC buttonDuring a mic synchro recording UsefulDuring a mic manual recording Changing intervals between tracksChecking Displays shuttle switch to 5 or 4 to display the battery levelThe remaining amount of battery level is shown by the battery indicatorUseful Changing Default SettingsFeatures 3 Press the MODE button to switch itemsBeep sound FeaturesUseful Track name Titling a MiniDiscAdvanced Disc namePerform steps 1 - 2 on page FeaturesAdvanced 1 Put the unit in the character input mode1.What is a master MiniDisc? Titling a MiniDisc continuedMaster MiniDisc operation Features6 Load a MiniDisc for stamping Operation of the MiniDisc for stampingFeatures Advanced5 To erase other tracks, repeat steps 1 - Advanced FeaturesEditing a Recorded MiniDisc To erase all of the tracks at once– Editing a Recorded MiniDisc – Advanced FeaturesTo divide a track To combine tracks3 Press the right shuttle switch toward Editing a Recorded MiniDisc continuedAdvanced Features 5 Press the right shuttle switch towardListening through a car stereo FeaturesAdvanced Listening through a stereo systemResuming auto play Other Features and CautionReferences – Other Features and Caution – Rechargeable batteryReferences MiniDisc System LimitationsReferences Error MessagesMEANING ReferencesReferences TroubleshootingTroubleshooting References MaintenanceCleaning – Maintenance –References Specifications– Specifications – References SHARP CORPORATION TERMS OF GUARANTEESHARP ELECTRONICS U.K. LTD