Advanced Recording | Sharp MD-MT866H specs

Advanced Recording

Useful Features – Advanced Recording –

28

Playback sound-actuated recording (Synchronised recording)

Recording automatically starts or pauses by detect- ing sound from the stereo system (Synchronised recording).

1 Press the REC button.

2 Begin playback on the stereo system con- nected to this portable MD.

3 Move the right shuttle switch to 5or 4 to adjust the recording level.

4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode. (See page 18,19)

●Select the starting point for your recording and press the PAUSE button.

5 Press the right shuttle switch toward “ENTER/SYNC”.

6 Begin playback on the stereo system. Recording will begin automatically.

To interrupt recording:

●When the stereo system is stopped, the unit will enter the synchro recording pause mode. When playback is resumed, the recording will be resumed.

●If a silence lasts for 3 seconds or more, the recording will be paused (Pause function does not work for approximately 10 seconds after a recording starts).

●When the unit receives sound again, recording automati- cally starts.

●A new track number is created when the recording re- sumes.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 28

Sharp MD-MT866H operation manual Advanced Recording

Contents

MD-MT866H Thank you for purchasing this Sharp product Accessories Contents Important Introduction Special NotesSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unit Names of Controls and Indicators Main unit Important Introduction Names of Controls and Indicators Main unit display panel Remote control unit Remote control display panelIndicators Names Battery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode How to use the Charge / Operation switch BatteryRemoving For use with the AC adaptor Power Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Using with the AC Adaptor Using withOperation mode Source Open Press Release Lock Preparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDisc Connections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket 50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB To update the recorded contents of the MiniDisc To interrupt recordingTo stop recording About the TOC Helpful tip when attaching a label OperationRecording Basic Playback BasicPlayback Before Playing back Volume control To turn off the powerBass control To interrupt playback Advanced Playback To locate the beginning of a track Useful Features Advanced Playback Random play or repeat playTo interrupt fast playback To return to normal playback Advanced Recording Useful Features Advanced Recording Press the Mode button whilst the record- ing is pausedLong-play recording monaural recording Start recording Press the right shuttle switch toward ENTER/SYNC You can erase a portion of a track and make a new recording When a recording is paused or whilst recording… To create your own track numbersRecording tracks as a single track You can create your own track numbers at any point About track numbers About sampling rate converter Useful Features Recording from a Microphone To write recorded contents on the MiniDiscRecording from a Microphone To record from a microphone Recording from a Microphone Useful Track intervalsDuring a mic manual recording During a mic synchro recording Useful Features Checking Displays Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp button To display the playing time of an indi Vidual trackTrack number and track name Press the Disp button to display the play Changing Default Settings FeaturesDefault Settings Changing Display backlight on the remote control Auto power saveBeep sound Auto play Titling a MiniDisc AdvancedMiniDisc Titling a Characters symbols To erase a characterTo enter a space To add characters What is a master MiniDisc? What is a MiniDisc for stamping?Stamping titles from another MiniDisc Before stamping Operation of the MiniDisc for stamping Advanced Features Press the right shuttle switch toward ENTER/SYNC againEditing a Recorded MiniDisc To erase tracks one at a time To divide a track To combine tracksPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select Combine To move a track White Red AD-CA55X References Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery Symptom Limitations MiniDisc System Limitations Error Messages Error MessagesReferences No Signal Tr. Protect Troubleshooting Troubleshooting Maintenance MaintenanceIf trouble occurs Moisture condensation Specifications Specifications Dimensions WeightSignal readout Error correction Sharp Corporation