Advanced Recording (continued)
Advanced Recording –
Useful Features
About track numbers
1.Track numbers are created automatically during re- cording via the analogue connection when a silence of 1 second or more is detected (Auto marker func- tion). A series of tracks can be recorded as one by disabling the auto marker function see page 31.
| About 1 |
| second |
| Silence |
First | Second |
track | track |
2.When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function).
●When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source.
●Track numbers may not be created properly, depending on the connected stereo system.
About sampling rate converter
This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape re- corders.
Note for digital recording
–
Playback side
Recording side
First track
Track A
First track
Track A
Second track Third track
Track B Track C
Second track Third track
Track B Track C
You can not copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. It is prevented by the SCMS (Serial Copy Management System). Recording from analogue inputs is not affected.
Digital signals | Digitally recorded | Cannot record |
| MiniDisc |
|
32
●Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise.
●The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.
CD player, MiniDisc player,
etc. DigitalDigital
connection connection
