Press the REC button, Digital recording | Sharp MD-MT866H instruction

1 Press the REC button.

●Record pause mode is entered.

●The REC button does not light.

2 Begin playback on the stereo system con- nected to this portable MD.

●To enable the record level to be set.

3 Move the right shuttle switch to 5 or 4 to adjust the recording level.

Analogue recording

●Adjust the recording level so that the maximum sound volume from the source makes the read- ing swing somewhere between –4 dB and 0 dB.

Level meter indicator

0dB 4dB

Digital recording

●You can adjust the level in 1 dB increments within the range of +12 - –12dB.

+12 - –12dB

●Once you adjust the digital recording level, the setting remains even after the recording stops. (For cancellation instructions, see page 38.)

4 Press the PAUSE button on the stereo sys- tem to enter the playback pause mode at the point you wish to start recording.

●Here you can select the track to be recorded.

5 Press the 06 button to start the MiniDisc unit recording.

6 Begin playback on the stereo system, the output will be recorded.

Notes:

●Changing the volume level whilst recording does not af- fect the recording.

●You cannot adjust the bass level whilst recording.

Basic Operation – Recording –

21

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 21

Sharp MD-MT866H operation manual Press the REC button, Digital recording, +12 -12dB

Contents

Thank you for purchasing this Sharp product MD-MT866H Accessories Contents Special Notes Important IntroductionSpecial Notes Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unit Main unit Names of Controls and Indicators Main unit display panel Important Introduction Names of Controls and Indicators Remote control display panel Remote control unitIndicators Names Battery Charger Battery- Charger Names SettingFace the top Charge Toward you Mode Battery How to use the Charge / Operation switchRemoving For use with the AC adaptor Using with the Rechargeable Battery Power Source Using with the Rechargeable BatteryCharging Power About the liquid crystal display LCD About charging timeDisplay Conditions Using with Using with the AC AdaptorOperation mode Source Release Lock Open Press Hold Function PreparationHold Function Inserting a MiniDisc Inserting a MiniDisc Connections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket To the DC 50/60Hz 5V socket To the wall socketTo the Optical Line in socket Recording Basic Operation RecordingBefore Recording Press the REC button Digital recording+12 -12dB To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOC Operation Helpful tip when attaching a labelRecording Basic Basic PlaybackPlayback Before Playing back To turn off the power Volume controlBass control To interrupt playback To locate the beginning of a track Advanced Playback Random play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playback Advanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recording You can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNC To create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any point About sampling rate converter About track numbers To write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphone Recording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recording Checking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp button Vidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the play Features Changing Default SettingsDefault Settings Changing Auto power save Display backlight on the remote controlBeep sound Auto play Advanced Titling a MiniDiscMiniDisc Titling a To erase a character Characters symbolsTo enter a space To add characters What is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stamping Operation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a time To combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select Combine To move a track AD-CA55X White Red Other Features and Caution References Other Features and Caution Resuming auto playRechargeable battery MiniDisc System Limitations Symptom Limitations Error Messages Error MessagesReferences Tr. Protect No Signal Troubleshooting Troubleshooting Maintenance MaintenanceIf trouble occurs Moisture condensation Specifications Specifications Weight DimensionsSignal readout Error correction Sharp Corporation