Inserting a MiniDisc

1 Slide the OPEN lever to release the com- partment door.

2 Lift it up.

3 Insert a MiniDisc as shown.

4 Close the compartment door.

Notes:

●Do not place the MiniDisc under the holder.

Preparation	Inserting a MiniDisc –
	–

		When you record on a	● If any resistance is felt, do not force the MiniDisc into the
		When you record on a
		MiniDisc, check that the	unit, as it may cause damage to the unit. If resistance is
	Check that the erase-protection		unit, as it may cause damage to the unit. If resistance is
Recordable Recordingtabis		erase prevention tab is	felt, remove the MiniDisc and reload it.
Recordable Recordingtabis		the recordable position.	felt, remove the MiniDisc and reload it.
	prevented	set to the “recordable”	● The lid can not be opened if “TOC” is displayed refer to
	prevented	position.	● The lid can not be opened if “TOC” is displayed refer to

the instruction on page 22.

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Page 17

Image 17

Sharp MD-MT866H operation manual Inserting a MiniDisc

Contents

Thank you for purchasing this Sharp product MD-MT866H Accessories Contents Special Notes Special NotesImportant Introduction Introduction Precautions PrecautionsAvoid using or leaving the unit in the following places Storing the unit Main unit Names of Controls and Indicators Main unit display panel Important Introduction Names of Controls and Indicators Remote control display panel Remote control unitIndicators Names Face the top Charge Toward you Mode Battery ChargerBattery- Charger Names Setting Battery How to use the Charge / Operation switchRemoving For use with the AC adaptor Charging Using with the Rechargeable BatteryPower Source Using with the Rechargeable Battery Display Conditions PowerAbout the liquid crystal display LCD About charging time Using with Using with the AC AdaptorOperation mode Source Release Lock Open Press Hold Function Hold FunctionPreparation Inserting a MiniDisc Inserting a MiniDisc Connections ConnectionsYou can record your favorite CDs or tapes to an MD To the DC in 5V socket To the Optical Line in socket To the Optical Line in socket To the DC50/60Hz 5V socket To the wall socket Before Recording RecordingBasic Operation Recording +12 -12dB Press the REC buttonDigital recording To interrupt recording To update the recorded contents of the MiniDiscTo stop recording About the TOC Operation Helpful tip when attaching a labelRecording Basic Basic PlaybackPlayback Before Playing back To turn off the power Volume controlBass control To interrupt playback To locate the beginning of a track Advanced Playback Random play or repeat play Useful Features Advanced PlaybackTo interrupt fast playback To return to normal playback Advanced Recording Press the Mode button whilst the record- ing is paused Useful Features Advanced RecordingLong-play recording monaural recording Start recording You can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNC To create your own track numbers When a recording is paused or whilst recording…Recording tracks as a single track You can create your own track numbers at any point About sampling rate converter About track numbers To write recorded contents on the MiniDisc Useful Features Recording from a MicrophoneRecording from a Microphone To record from a microphone Recording from a Microphone Track intervals UsefulDuring a mic manual recording During a mic synchro recording Checking Displays Useful Features Checking DisplaysTo check the elapsed time and remaining time of the track During playback, press the Disp button Vidual track To display the playing time of an indiTrack number and track name Press the Disp button to display the play Features Changing Default SettingsDefault Settings Changing Auto power save Display backlight on the remote controlBeep sound Auto play Advanced Titling a MiniDiscMiniDisc Titling a To erase a character Characters symbolsTo enter a space To add characters What is a MiniDisc for stamping? What is a master MiniDisc?Stamping titles from another MiniDisc Before stamping Operation of the MiniDisc for stamping Press the right shuttle switch toward ENTER/SYNC again Advanced FeaturesEditing a Recorded MiniDisc To erase tracks one at a time To combine tracks To divide a trackPress the Edit button repeatedly to select Divide Press the Edit button repeatedly to select Combine To move a track AD-CA55X White Red Rechargeable battery Other Features and CautionReferences Other Features and Caution Resuming auto play MiniDisc System Limitations Symptom Limitations References Error MessagesError Messages Tr. Protect No Signal Troubleshooting Troubleshooting Maintenance MaintenanceIf trouble occurs Moisture condensation Specifications Specifications Weight DimensionsSignal readout Error correction Sharp Corporation

Inserting a MiniDisc

Preparation

Inserting a MiniDisc –