References | – Troubleshooting – |
52
Troubleshooting
Many potential “problems” can be resolved by the owner without calling a service technician.
If something seems to be wrong with this product, check the following before calling your authorised SHARP dealer or service centre.
PROBLEM |
| CAUSE |
|
|
|
The unit does not turn on. | ● Is the AC adaptor disconnected? | |
|
| ● Is the battery exhausted? |
|
| ● Is the unit in the hold mode? |
|
| ● Has condensation formed inside the unit? |
|
| ● Is the unit being influenced by mechanical shock or by static electricity? |
|
| |
No sound is heard from the ear- | ● Is the volume set too low? | |
phones. | ● Is the remote control unit or the earphones plugged in? | |
|
| ● Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music? |
|
| |
When the operation buttons are | ● Is the unit in the hold mode? | |
pressed, the unit does not respond. | ● Is the battery exhausted? | |
|
| ● Is the remote control unit plug or the earphones plug inserted firmly? |
|
| |
Some sounds are skipped. | ● Is the battery exhausted? | |
|
| ● Is the unit being subjected to excessive vibration? |
|
| |
The MiniDisc cannot be ejected. | ● Has the track number or character information been updated on the disc yet? | |
|
| ● Is the unit in the recording or editing mode? |
|
| |
Recording and editing are impos- | ● Is the MiniDisc protected against accidental erasure? | |
sible. | ● Is the unit connected properly to the other equipment? | |
|
| ● Is the AC adaptor unplugged or did a power failure occur whilst recording or editing? |
|
| ● Is the unit in the hold mode? |
|
| ● Is an optical signal being output from the stereo system? |
|
| Read the operation manual for the stereo system. |
