Input sensitivity, Output level, Dimensions, Type | Sharp MD-MT866H

Input sensitivity

MIC H: reference input level

0.25 mV

input impedance

10 k ohms

MIC L:

reference input level

2.5 mV

input impedance

10 k ohms

LINE:

reference input level

100 mV

input impedance

20 k ohms

Output level

Earphones: maximum output level

5 mW + 5 mW

load impedance

32 ohms

LINE:

specified output

250 mV (-12 dB)

load impedance

10 k ohms

Dimensions

Width:

72.0 mm (2-27/32”)

Height:

19.5 mm (25/32”)

Depth: 78.9 mm (3-1/8”)

Weight

137 g (0.30 lbs.) with rechargeable battery

References

Specifications– –

Frequency response

20 – 20,000 Hz (± 3 dB)

Input socket

Line/optical digital, microphone (powered by the main unit)

Output socket

Earphones (impedance: 32 ohms)/remote control unit

Type

Portable MiniDisc recorder

Signal readout

Non-contact, 3-beam semi-conductor laser pick-up

Audio channels

Stereo 2 channels/monaural (long-play mode) 1 channel

Rotation speed

Approx. 400 – 1,350 rpm

Error correction

ACIRC (Advanced Cross Interleave Reed-Solomon Code)

Coding

ATRAC (Adaptive Transform Acoustic Coding), 24-bit computed type

Recording method

Magnetic modulation overwrite method

Sampling frequency

44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)

Wow and flutter

Unmeasurable (less than ±0.001% W. peak)

55

Web-site:www.sharp.co.uk/support Help Line: 08705 274277 (office hours)

Image 55

Sharp MD-MT866H Input sensitivity, Output level, Dimensions, Weight, Input socket, Output socket, Type, Signal readout

Contents

Thank you for purchasing this Sharp product MD-MT866H Accessories Contents Important Introduction Special NotesSpecial Notes Introduction Storing the unit PrecautionsPrecautions Avoid using or leaving the unit in the following places Main unit Names of Controls and Indicators Main unit display panel Important Introduction Names of Controls and Indicators Names Remote control unitRemote control display panel Indicators Battery- Charger Names Setting Battery ChargerFace the top Charge Toward you Mode For use with the AC adaptor How to use the Charge / Operation switchBattery Removing Power Source Using with the Rechargeable Battery Using with the Rechargeable BatteryCharging About the liquid crystal display LCD About charging time PowerDisplay Conditions Source Using with the AC AdaptorUsing with Operation mode Release Lock Open Press Preparation Hold FunctionHold Function Inserting a MiniDisc Inserting a MiniDisc To the DC in 5V socket To the Optical Line in socket ConnectionsConnections You can record your favorite CDs or tapes to an MD 50/60Hz 5V socket To the wall socket To the DCTo the Optical Line in socket Basic Operation Recording RecordingBefore Recording Digital recording Press the REC button+12 -12dB About the TOC To update the recorded contents of the MiniDiscTo interrupt recording To stop recording Basic Helpful tip when attaching a labelOperation Recording Before Playing back PlaybackBasic Playback To interrupt playback Volume controlTo turn off the power Bass control To locate the beginning of a track Advanced Playback To return to normal playback Useful Features Advanced PlaybackRandom play or repeat play To interrupt fast playback Advanced Recording Start recording Useful Features Advanced RecordingPress the Mode button whilst the record- ing is paused Long-play recording monaural recording You can erase a portion of a track and make a new recording Press the right shuttle switch toward ENTER/SYNC You can create your own track numbers at any point When a recording is paused or whilst recording…To create your own track numbers Recording tracks as a single track About sampling rate converter About track numbers To record from a microphone Useful Features Recording from a MicrophoneTo write recorded contents on the MiniDisc Recording from a Microphone Recording from a Microphone During a mic synchro recording UsefulTrack intervals During a mic manual recording During playback, press the Disp button Useful Features Checking DisplaysChecking Displays To check the elapsed time and remaining time of the track Press the Disp button to display the play To display the playing time of an indiVidual track Track number and track name Changing Changing Default SettingsFeatures Default Settings Auto play Display backlight on the remote controlAuto power save Beep sound Titling a Titling a MiniDiscAdvanced MiniDisc To add characters Characters symbolsTo erase a character To enter a space Before stamping What is a master MiniDisc?What is a MiniDisc for stamping? Stamping titles from another MiniDisc Operation of the MiniDisc for stamping To erase tracks one at a time Advanced FeaturesPress the right shuttle switch toward ENTER/SYNC again Editing a Recorded MiniDisc Press the Edit button repeatedly to select Combine To divide a trackTo combine tracks Press the Edit button repeatedly to select Divide To move a track AD-CA55X White Red References Other Features and Caution Resuming auto play Other Features and CautionRechargeable battery MiniDisc System Limitations Symptom Limitations Error Messages Error MessagesReferences Tr. Protect No Signal Troubleshooting Troubleshooting Moisture condensation MaintenanceMaintenance If trouble occurs Specifications Specifications Error correction DimensionsWeight Signal readout Sharp Corporation