Show ip unicast cache summary, Show ip vrrp

Chapter 2 Avaya C460 CLI Commands

show ip unicast cache summary

User level: read-only, read-write, admin.

Use the show command to display the number of host networks and next-hops in the module’s unicast cache.

The syntax for this command is:

show ip unicast cache summary

Example:

Router-1>show ip unicast cache summary

Cache Summary
===============
Hosts	:	71
Networks	:	24
Next-Hops :		37

show ip vrrp

User level: read-only, read-write, admin.

Use the show vrrp command to display VRRP information.

The syntax for this command is:

show ip vrrp [<vlan> [router-id <vr-id>]][detail]

vlan		Filter by VLAN.
router-id		Filter by virtual router ID (1-255)
vr-id		The virtual router ID.
detail		Provide detailed information.
Example:
Router-1>show ip vrrp
VRRP is globally enabled
VLAN	VRID	IP Address	PriTimer	State	Since
------	----------------------------------------------------
1	1	192.168.66.23	255 1	MASTER	00:00:00
1	2	192.168.66.24	100 1	BACKUP	00:00:00

170	Avaya C460 Reference Guide

Page 182

Image 182

Avaya C460 manual Show ip unicast cache summary, Router-1show ip unicast cache summary, Show ip vrrp

Contents

Avaya C460 Avaya.com Contents Contents Avaya C460 Reference Guide Iii Contents Contents Contents Avaya C460 Reference Guide Vii Viii Avaya C460 Reference Guide Contents Contents Using the CLI Conventions Used Command line prompt looks as follows Command Abbreviations Navigation, Cursor Movement and Shortcuts Tree command Retstatus commandC460-1#set port negotiation 2/4 disable C460-1#retstatus C460-1terminal width 80 terminal width Terminal widthTerminal width character Terminal length C460-1clear screen Clear screenClear screen Avaya C460 Sessions Session router Security Levels Entering the Supervisor Level C460-1help show Entering the CLIEntering the Technician Level Prompt changes to Routerconfig-ifinterfacename# Prompt changes to Routerconfigure routerprotocolname# Chapter Using the CLI Avaya C460 Reference Guide Access list Area Arp C460-1configure#arp 192.168.7.8 00400d8c2a01Arp timeout Banner login line No arp timeout secondsNo banner login Banner post-login Banner post-login line No banner post-loginC460-1super#banner post-login Clear arp-cache C460-1#clear cam C460-1super#clear dot1x configClear cam Clear dynamic vlans C460-1#clear event-log C460-1#clear dynamic vlansClear event-log Clear fragment Clear ip route Clear interfaceC460-1#clear interface outband C460-1#clear ip route 134.12.3.0 Router-1#clear ip traffic C460-1configure#clear ip route 192.168.49.1Clear ip traffic Clear log C460-1#clear port mirror 9/2/10/4 Clear radius authentication serverClear radius authentication serverprimarysecondary Clear port static-vlan Router-1#clear rmon2 statistics C460-1super#clear radius authentication server secondaryClear rmon2 statistics Clear snmp trap C460-1#clear system-log C460-1#clear snmp trapClear system-log modulenumber Clear timezone C460-1#clear vlan C460-1configure#clear vlan 2 name vlan2Clear vlan Clear vlan Layer C460-1#copy l2-config tftp c\C460\config ConfigureCopy l2-config tftp filename ip C460-1#copy running-config tftp /folder/c460/startup.cfg C460-1#copy running-config startup-configC460-1#copy running-config tftp c\c460\startup.cfg Copy startup-config tftp C460-1#copy tftp EW-archive c\C460\switch1.cfg Router-1#copy startup-config tftp c\c460\startup.cfgC460-1#copy startup-config tftp /folder/c460/startup.cfg Copy tftp EWarchive filename ip Copy tftp startup-config filename ip Copy tftp l2-config filename ipC460-1#copy tftp l2-config c\C460\backup Router-1copy tftp startup-config c\C460\router1.cfg Copy tftp SWimageB Copy tftp SWimageA filename ipC460-1#copy tftp SWimageA c\imgA.bin Copy tftp SWimageB filename ip No default-metric number Default-metricDefault-metric Ospf Disable interface outband inband Default-metric RIPDisable interface C460-1#disable interface outband Enable vlan commands Enable interfaceEnable interface outband inband Enable vlan commands C460-1#fragment chain Erase startup-configC460-1#erase startup-config No fragment size database-limit Router-1#fragment size Fragment timeoutRouter-1#fragment timeout Get time Router-1hostname Marketing C460-1#hostname gregoryHostname Layer Interface Ip access-default-action Ip access-group Ip access-list C460-1configure#ip access-list-cookie 101 C460-1configure#ip access-list 101 23 deny ip any 1.2.0.0Ip access-list-cookie Ip access-list-copy C460-1configure#ip access-list-name 101 16 special C460-1configure#ip access-list-copy 100Ip access-list-dscp name Ip access-list-dscp operation Ip access-list-dscp precedence Ip access-list-dscp precedence policy-list-number dscp Ip access-list-name C460-1configure#ip access-list-dscp precedenceIp access-list-dscp trust Router-1ip access-list-owner 101 admin C460-1configure#ip access-list-name 101 morningIp access-list-owner Ip address Ip bootp-dhcp network Ip admin-stateIp admin-state up/down 255.255.255.0 C460-1configure#no ip bootp-dhcp relay No ip bootp-dhcp network ip-addressIp bootp-dhcp relay 192.168.169.0 Ip broadcast-address bc addr Ip bootp-dhcp server ip-address192.168.37.46 192.168.255.255 Ip directed-broadcast Ip default-gatewayC460-1configure#ip default-gateway No ip directed-broadcast C460-1configure#ip max-arp-entries Ip icmp-errorsNo ip icmp-errors Ip max-arp-entries No ip netbios-rebroadcast mode C460-1configure#no ip max-arp-entriesC460-1configure#ip max-route-entries No ip max-route-entries value Ip netmask-format No ip netmask-format mask-format Key mypass C460-1configure#ip netmask-format bitcount decimalNo ip ospf authentication-key key No ip ospf cost cost Ip ospf hello-interval Ip ospf dead-intervalNo ip ospf dead-interval seconds No ip ospf hello-interval seconds Ip ospf router-id Ip ospf priorityNo ip ospf priority priority No ip ospf router-id router id Ip proxy-arp Ip rip authentication keyRouter-1ip ospf router-id Ip redirects Key hush-hush No ip rip authentication key passwordIp rip authentication mode Ip rip default-route-mode mode Mode simpleIp rip default-route-mode Mode talk listen Ip rip send-receive-mode Ip rip rip-versionIp rip rip-version Ip rip split-horizon Ip routing C460-1configure#ip route 192.168.33.0 255.255.255.0Ip route Ip routing-mode Ip routing-mode modeNo ip routing Ip vlan/ip vlan name C460-1configure#ip simulate 100 192.67.85.12Ip simulate No ip vrrp vr-id No ip vlan vlan-idIp vrrp Ip vrrp address Ip vrrp auth-key No ip vrrp vr-idaddress ip-address10.0.1.2 No ip vrrp vr-idauth-key key-string Ip vrrp preempt No ip vrrp vr-idoverride addr ownerOwner Ip vrrp primary Ip vrrp priority No ip vrrp vr-idprimary ip-address192.168.66.23 No ip vrrp vr-idpriority pri-value Ip vrrp timer Line Network Ospf C460-1super#line 5 C460 CLINetwork RIP Area No rmon alarm Alarm IndexC460-1#no rmon alarm No rmon event Event Index No username name No rmon history History IndexC460-1#no rmon history C460-1super#no username john Passive-interface Nvram initialize switch allC460-1#nvram initialize Router-1#passive-interface FastEthernet Ping Layer PingC460-1ping No redistribute protocol Router-1ping 149.49.48.1Redistribute Ospf Redistribute RIP Reset Avaya C460 CLI Commands Rmon alarm Rmon event Rmon history Rmon2 protocol-dist C460-1#rmon history 1026 1026 3/2 30 buckets 20 owner amirRmon2 protocol-dir No router ospf Router-1#rmon2 protocol-distRouter ospf Router-1 super # router ospf Router vrrp Session C460-1session router Set allowed managers enableddisabledC460-1super#set allowed managers enabled Set allowed managers Set arp-aging-interval value C460-1super#set allowed managers ip addSet arp-aging-interval C460-1#set arp-aging-interval Set broadcast storm control enabledisable Set boot bank valueC460-1#set boot bank a C460-1#set broadcast storm enable C460-1#set broadcast storm control threshold Set device-mode modeSet broadcast storm control threshold threshold C460-1super# set device-mode Router Set dot1x quiet-period Seconds Set dot1x max-req countC460-1super#set dot1x max-req Set dot1x re-authperiod Seconds C460-1super#set dot1x server-timeoutC460-1super#set dot1x quiet-period C460-1super#set dot1x re-authperiod C460-1super#set dot1x system-auth-control disable Set dot1x supp-timeout SecondsC460-1super#set dot1x supp-timeout C460-1super#set dot1x system-auth-control enable Set icmp-redirect Set dot1x tx-periodC460-1super#set dot1x tx-period C460-1#set icmp-redirect accept Set inband vlan vlannum Set intelligent-multicast enabledisableC460-1#set intelligent-multicast enable Set intelligent-multicast client-port-pruning time time C460-1#set intelligent-multicast client-port-pruning-time Set intelligent-multicast group-filtering delay timeC460-1#set intelligent-multicast group-filtering-delay time Set intelligent-multicast router port pruning time Set interface outband Set interface inbandC460-1#set interface inband 1 1.1.1.1 Set interface outband ipaddr netmask Set interface ppp Set interface ppp enable/disable/off/resetC460-1#set interface outband 149.49.75.174 C460-1#set interface ppp 149.49.34.125 C460-1#set interface ppp disable C460-1#set interface ppp resetC460-1#set interface ppp enable Set ip route C460-1#set ip route 0.0.0.0 24 Set logout Set licenseC460-1#set license 026 9b8 216 908 dea f4d layer-3 Set mac-aging status C460-1#set logoutSet mac-aging Set mac-aging-time Set outband duplex full half C460-1#set mac-aging-timeSet outband duplex C460-1#set outband duplex full Set outband speed speed Set outband negotiation enable disableC460-1#set outband negotiation enable C460-1#set outband speed 100MB Router-1#set policy type all Set port channel Set port auto-negotiation-flowcontrol-advertisementSet port auto-negotiation-flowcontrol-advertisement module C460-1#set port classification 2/19 valuable C460-1#set port channel 4/6,18 on server2Set port classification C460-1#set port disable 4/1 Set port disableSet port disable module/port Set port dot1x initialize Set port dot1x port-control Set port dot1x max-reqC460-1super#set port dot1x max-req 1/2 Set port dot1x quiet-period Set port dot1x re-authenticateSet port dot1x re-authentication C460-1super#set port dot1x quiet-period 4/2 C460-1super#set port dot1x re-authperiod 1/2 Set port dot1x server-timeoutSet port dot1x re-authperiod C460-1super#set port dot1x supp-timeout 1/2 C460-1super#set port dot1x server timeout 1/2Set port dot1x supp-timeout Set port dot1x tx-period Set port duplex Set port edge admin stateC460-1super#set port dot1x quiet-period 1/2 C460-1#set port duplex 4/1 full Set port enable C460-1#set port edge admin state 3/1 edge-portC460-1#set port edge admin state 3/1 non-edge-port Set port enable module/port C460-1#set port enable 4/1 C460-1#set port flowcontrol send 5/1 off Set port flowcontrolC460-1#set port flowcontrol receive 5/1 on Set port mirror Set port levelC460-1#set port level 3/1 Set port mirror source-port module/port mirror-port module Set port negotiation Set port nameC460-1#set port name 4/21 arthur C460-1#set port negotiation 4/1 disable Set port point-to-point admin status Set port powerinline priority C460-1#set port point-to-point admin status 1/1 force-trueSet port powerinline Set port redundancy Set port redundancy enabledisableC460-1#set port redundancy enable Set port redundancy on/off Set port redundancy-intervals Set port spantree C460-1#set port spantree enable 3/1C460-1#set port redundancy-intervals 100 Set port spantree force-protocol-migration Set port spantree costSet port spantree cost module/port value Set port spantree priority module/port value C460-1#set port spantree force-protocol-migration 1/1Set port spantree priority C460-1#set port spantree priority 3/4 C460-1#set port static-vlan 3/4-6 C460-1#set port speed 4/1 100MBSet port static-vlan Set port trap C460-1#set port trap 3/2 enable Set port vlan Set port vlan-binding-mode Set power redundancyC460-1#set port vlan 2 3/5 Set port vlan-binding-mode portlist value C460-1#set powerinline budget C460-1#set power redundancy enableSet powerinline budget Set ppp authentication incoming C460-1#set ppp baud-rate 38400 ppp baud rate was set to C460-1#set ppp authentication incoming chapSet ppp baud-rate Set ppp chap-secret chap-secret C460-1super#set radius authentication enable Set ppp incoming timeout timeC460-1#set ppp incoming timeout Set radius authentication retry-number number Set radius authentication secret string Set radius authentication retry-time timeC460-1super#set radius authentication retry-time C460-1super#set radius authentication secret hush C460-1super#set radius authentication udp-port number Set radius authentication udp-portSet radius authentication udp-port number Set slot power admin Set slot power priority C460-1set slot power admin 4 upC460-1set slot power admin 4 down C460-1#set snmp community read-only read Set slot power priority slot levelC460-1#set slot power priority 3 high Set snmp retries number C460-1#set snmp retries Set snmp timeout numberC460-1#set snmp timeout Set snmp trap rcvraddr C460-1#set snmp trap 192.168.173.42 disable config C460-1#set snmp trap 192.168.173.42 enable configC460-1#set snmp trap 192.168.173.42 enable all Set snmp trap enabledisable auth Set spantree enable/disable Set spantree default-path-costC460-1#set spantree default-path-cost rapid-spanning-tree C460-1#set spantree hello-time Set spantree forward-delaySet spantree hello-time Set spantree max-age Set spantree priority bridgepriority C460-1#set spantree max-ageSet spantree priority C460-1#set spantree priority Set system contact C460-1#set spantree tx-hold-countSet spantree version Set system contact string Set system name string Set system location stringC460-1#set system location tech-support C460-1#set system name C460-1 C460-1set time protocol sntp-protocol Set time client enabledisableC460-1#set time client enable C460-1set time protocol time-protocol C460-1#set time server Set time serverSet time server ip address Set timezone Set vlan Set trunkC460-1#set trunk 3/3 dot1q C460-1#set vlan 3 name gregory Set web aux-files-url C460-1configure#set vlan 2 name vlan2Set vlan Layer C460-1#set welcome message avaya Show access listsSet welcome message Show allowed managers status Router-1show access-listsShow allowed managers status C460-1super#show allowed managers status C460-1super#show allowed managers table Show allowed managers tableShow allowed managers table C460-1show arp-tx-interval Show arp-aging-intervalC460-1show arp-aging-interval Show boot bank C460-1show banner loginC460-1show banner post-login C460-1show boot bank Show cam Show broadcast storm controlC460-1show broadcast storm control 146 Avaya C460 Reference Guide Show cam vlan Show cam macC460-1 show cam mac C460-1show cam vlan Show copy status Show chassis-identityC460-1show chassis-identity C460-1show copy status C460-1show cpu load Show cpu loadShow cpu load Show cs C460-1show device-mode C460-1show dot1x modeShow device-mode Show environment fans C460-1show dot1x statisticsShow dynamic vlans Router-1show dynamic vlans C460-1show environment fans Show environment power Show environment power Show event log Show erase statusShow event-log C460-1show icmp-redirect Router-1show fragmentShow icmp-redirect Show image version Show interface C460-1#show ip access group access-groupC460-1show intelligent-multicast C460-1show interface Show ip access-lists Show ip access-list-dscpC460-1 show ip access-list-dscp Show ip access-listspolicy-list-number C460-1show ip access-list-summary C460-1 show ip access-listsShow ip access-list-summary Show ip arp Router-1show ip icmp Show ip icmpShow ip icmp Show ip interface Router-1show ip interface Showing 2 Interfaces Show ip ospf Show ip interface briefRouter-1show ip interface brief Router-1show ip ospf Show ip ospf interface interface-name Show ip ospf databaseRouter-1 super # show ip ospf interface Router-1show ip ospf interface Show ip protocols Show ip ospf neighborRouter-1show ip ospf neighbor Show ip protocols protocol Show ip route Show ip reverse-arpRouter-1sh ip reverse-arp 0010a49897e0 C460-1show ip route Router-1show ip route best-match Show ip route Router-1show ip routeShow ip route best-match dst addr Show ip route static ip addr mask Router-1sh ip route summary Router-1sh ip route staticShow ip route summary Show ip traffic Router-1show ip traffic Show ip unicast cache Show ip unicast cache ip addr Show ip unicast cache networks net addr net mask Router-1 show ip unicast cacheShow ip unicast cache networks Router-1show ip unicast cache networks 192.168.6.0 Show ip unicast cache networks detailednet addr net maskShow ip unicast cache networks detailed Show ip unicast cache nextHop Show ip vrrp Show ip unicast cache summaryRouter-1show ip unicast cache summary Show ip vrrp detail Show ip vrrp detail 172 Avaya C460 Reference Guide C460-1show l2-config Show l2-configShow l2-config 174 Avaya C460 Reference Guide Avaya C460 Reference Guide 175 176 Avaya C460 Reference Guide Avaya C460 Reference Guide 177 178 Avaya C460 Reference Guide Avaya C460 Reference Guide 179 180 Avaya C460 Reference Guide Avaya C460 Reference Guide 181 182 Avaya C460 Reference Guide Show logout Show licenseC460-1show license C460-1show logout C460-1show mac-aging-time C460-1show mac-agingShow mac-aging-time Show module Show module C460-1show outband Show outbandShow outband Show policy type Show port C460-1show port 3/4 Show port channel Show port auto-negotiation-flowcontrol-advertisementSet auto-negotiation-flowcontrol-advertisement module/port C460-1 show port channel C460-1 show port channel 3/3 info C460-1show port classification 4/8 Show port classificationShow port classification module/port C460-1show port classification 4/9 Port Port Classification Show port dot1x C460-1 show port dot1x 3/3 192 Avaya C460 Reference Guide Show port dot1x statistics C460-1show port statistics 1/1 Show port flowcontrol Show port edge stateC460-1show port edge state Show port flowcontrol module/port Show port mirror C460-1show port flowcontrol 3/4Show port mirror C460-1show port point-to-point status C460-1show port mirror port mirroringShow port point-to-point status C460-1show port redundancy Show port redundancyShow port redundancy Show port trap Show port vlan-binding-mode module/port Show powerinlineShow port vlan-binding-mode C460-1 show powerinline Show powerinline budget C460-1show ppp authentication C460-1 show powerinline budgetShow ppp authentication Show ppp baud-rate Show ppp incoming timeout Show ppp configurationC460-1show ppp configuration C460-1show ppp incoming timeout Show rmon alarm Show radius authenticationC460-1 show radius authentication Show rmon alarm Alarm Index Show rmon event Event Index C460-1show rmon alarmShow rmon event C460-1show rmon event C460-1show rmon history Show rmon historyShow rmon history History Index Show rmon statistics Router-1 show rmon2 dscp-stats C460-1show rmon statisticsShow rmon2 dscp-stats Show rmon2 protocol-dist Show rmon2 protocol-dirRouter-1show rmon2 protocol-dir Avaya C460 Reference Guide 207 Show rmon2 state Router-1show rmon2 state Show running-config Router-1show running-config Show secure current C460-1#show secure current Show snmp C460-1show snmp Show snmp retries Show snmp timeoutC460-1show snmp timeout C460-1show snmp retries C460-1show spantree Show spv C460-1 show spv Show startup-config Router-1show startup-config Show system log Show systemShow system-log Show system-log slot C460-1show system-log Show tftp download software status modnum Show system-log LayerShow tftp download software status C460-1show tftp download software status C460-1show time Syntax for this command is Show timeC460-1show tftp upload status Show time parameters C460-1show timezone Show timezoneShow timezone Show trunk Show vlan Show usernameShow username Show vlan Show web aux-files-url C460-1 show vlanShow vlan Layer Show web aux-files-url C460-1super# sync spv Sync spvSync spv Tech Timers basic C460-1terminal width RIP update timer in seconds minimum = Timers ospf No timers spf spf-holdtime Router-1traceroute TracerouteTraceroute host Tree Username C460-1super#username root password secret access-type admin Validate-group C460-1configure#validate policy-list Validate policy-list Avaya C460 CLI Commands 232 Avaya C460 Reference Guide Layer 2 CLI Commands Layer 2 CLI Commands Timezone 221 show access lists Terminal width 225 tree Username Layer 3 CLI Commands Layer 3 CLI Commands Avaya C460 Reference Guide 239 Layer 3 CLI Commands 240 Avaya C460 Reference Guide Agent Network Agent Address ResolutionAlarm Backbone Bridge BeaconingBroadcasting Burst Collision Chassis ViewClient Data Link Layer Dot1Q Duplex ModeDomain End System Frame Flow ControlFragment Full Duplex FDX Ieee HostHub In-Band IP Address Interswitch Link ISLInternet Jabber MAC Layer Link-State ProtocolsMAC Address MAC List Netmask ModuleMulticasting Network Plus Tagging Out-of-BandPacket Port QoS ProtocolProtocol Stack Query Segmentation RouterRouting Table Side-Band Socket Spanning Tree Protocol Switch Monitoring Standalone ModeSwitch Stack Tree View TransceiverTrap Unicast Glossary 256 Avaya C460 Reference Guide

Avaya C460 Show ip unicast cache summary, Router-1show ip unicast cache summary, Show ip vrrp

Models: C460

Chapter 2 Avaya C460 CLI Commands

show ip unicast cache summary

Router-1>show ip unicast cache summary

show ip vrrp

Router-1>show ip vrrp