Chapter 2 Avaya C460 CLI Commands

Example:

C460-1#set port point-to-point admin status 1/1 force-true

port 1/1 point to point admin status is set to force-true

set port powerinline

User level: read-write, admin.

Use the set port powerinline command to enable or disable the load detection process on the port.

The syntax for this command is:

set port powerinline <module_number/port_number> {enable

disable}

 

module

Number of the module (3-6).

port

Number of the port on the module. If you do not specify a

 

number, all the ports on the module are shown.

 

You can also specify a range of ports separated by a dash, for

 

example, 4/5-13 for ports 5 to 13 on module 4.

enable

Enable load detection on the port

disable

Disable load detection on the port

Example:

To enable PoE on ports 1 to 3 of module three:

C460-1# set port powerinline 3/1-3 enable

Load detection process on ports 3/1-3 is enabled

set port powerinline priority

User level: read-write, admin.

Use the set port powerinline priority command to set the priority level for powering the port.

The syntax for this command is:

set port powerinline <module_number/port_number> <priority>

module

Number of the module (3-6).

Avaya C460 Reference Guide

113

Page 125
Image 125
Avaya manual C460-1#set port point-to-point admin status 1/1 force-true, Set port powerinline priority