Avaya manual C460-1configure#no ip max-arp-entries, No ip max-route-entries value

Chapter 2 Avaya C460 CLI Commands

To restore the maximum number of ARP cache entries to its default:

C460-1(configure)#no ip max-arp-entries

ip max-route-entries

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

The ip max-route-entriescommand exists for compatibility with Avaya™ P580. There is no limitation on the size of the routing table, except for the amount of available memory.

Use the no ip max-route-entriescommand to remove the limitation.

The syntax for this command is:

[no] ip max-route-entries <value>

value number of entries

Example:

C460-1(configure)#ip max-route-entries 4000

ip netbios-rebroadcast

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode.

Use the ip netbios-rebroadcastcommand to set the NETBIOS rebroadcasts mode on an interface.

Use the no ip netbios-rebroadcastcommand to disable NETBIOS rebroadcasts on an interface.

The syntax for this command is:

[no] ip netbios-rebroadcast <mode>

Avaya C460 Reference Guide 49