Avaya manual C460-1#clear vlan, Clear vlan Layer, C460-1configure#clear vlan 2 name vlan2

Chapter 2 Avaya C460 CLI Commands

clear vlan

User level: read-write, admin.

Use the clear vlan command to delete an existing VLAN and return ports from this VLAN to the default VLAN #1. When you clear a VLAN, all ports assigned to that VLAN are assigned to the default VLAN #1.

The syntax for this command is:

clear vlan <vlan-id>[name<vlan_name>]

vlan_id	VLAN number
vlan_name	VLAN name

If you wish to enter a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

Example:

C460-1#clear vlan 100

This command will assign all ports on vlan 100 to their default in the entire management domain - do you want to continue (Y/N)? y

VLAN 100 deletion successful

clear vlan (Layer 3)

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

Use the clear vlan command to delete a Router layer 2 interface.

The syntax for this command is:

clear vlan [<ifIndex>] [name <ifname>]

ifIndex	Interface Index
ifname	Interface name (used in layer 3 protocols)

Example:

C460-1(configure)#clear vlan 2 name vlan2

24 Avaya C460 Reference Guide