Chapter 2 Avaya C460 CLI Commands
set interface inband
User level: read-write, admin.
Use the set interface inband command to configure the inband interface on the Supervisor Module.
The syntax for this command is:
set interface inband <vlan> <ip_addr> <netmask>
vlan | The number of the VLAN to be assigned to the interface |
ip_addr | IP address |
netmask | Subnet mask |
Example:
To configure the inband interface on VLAN 1, IP address 1.1.1.1 and netmask 255.255.255.0:
C460-1# set interface inband 1 1.1.1.1 255.255.255.0
This command will RESET the device
*** Reset *** - do you want to continue (Y/N)? y
set interface outband
User level: read-write, admin.
Use the set interface outband command to configure the outband interface on the supervisor Module.
The syntax for this command is:
set interface outband <ip_addr> <netmask>
ip_addr | IP address |
netmask | Subnet mask |
Example: |
|
90 | Avaya C460 Reference Guide |
