Avaya manual Clear interface, C460-1#clear interface outband, Clear ip route Layer

Chapter 2 Avaya C460 CLI Commands

clear interface

User level: read-write, admin.

Use the clear interface command to clear the inband or outband interface from the NVRAM.

The syntax for this command is:

clear interface [outband inband]

outband	Clears the outband interface
inband	Disables the inband interface
Example:

C460-1#clear interface outband

Interface outband Cleared.

You must reset the device in order for the change to take effect.

clear ip route

User level: read-write, admin.

Use the clear ip route command to delete IP routing table entries.

The syntax for this command is:

clear ip route <destination> <mask>

destination	IP address of the network, or specific host to be added
mask	IP address of the router
Example:

C460-1#clear ip route 134.12.3.0 255.255.255.0

Route deleted.

clear ip route (Layer 3)

User level: read-write, admin.

If you are at the “read-write” user level, you can only access this command in Configure mode.

Type configure at the command prompt to enter configure mode.

Avaya C460 Reference Guide 19