Avaya manual C460-1#set spantree tx-hold-count, Set spantree version, Set system contact

Chapter 2 Avaya C460 CLI Commands

Example:

C460-1#set spantree tx-hold-count 3

tx hold count is set to 3.

set spantree version

User level: read-write, admin.

Use the set spantree version command to set the rapid spanning tree state machine to work as "STP compatible".

The syntax for this command is:

set spantree version <version>

version	common-spanning-tree — compatible with ieee802.1D standard.
	rapid-spanning-tree — compatible with ieee802.1W standard
Example:

C460-1#set spantree version rapid-spanning-tree Spanning tree version is set to rapid spanning tree.

set system contact

User level: read-only, read-write, admin.

Use the set system contact command to set the mib2 system contact MIB variable.

The syntax for this command is:

set system contact [string]

string	•	The contact name string should be typed inside inverted
		commas.
	•	The name is cleared if you leave this field blank.
Example:

C460-1(super)# set system contact “gregory kohll”

*** Set system contact ***

system contact set

134 Avaya C460 Reference Guide