Avaya Set port disable module/port, C460-1#set port disable 4/1, Set port dot1x initialize

Chapter 2 Avaya C460 CLI Commands

set port disable

User level: read-write, admin.

Use the set port disable command to disable a port or range of ports.

The syntax for this command is:

set port disable [module>/<port]

module	Number of the module (3-6). If you do not specify a number,
	the ports on all the modules are shown.
port	Number of the port on the module. If you do not specify a
	number, all the ports on the module are shown.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
Example:

C460-1#set port disable 4/1

Port 4/1 disabled.

set port dot1x initialize

User level: admin.

Use the set port dot1x initialize command to initialize port dot1x.

The syntax for this command is:

set port dot1x initialize <module/port>

module/	Module and port number.
port	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
Example:

C460-1(super)#set port dot1x initialize 2/3

port 1/2 dot1x was initialized

Avaya C460 Reference Guide 101