Chapter 2 Avaya C460 CLI Commands

show device-mode

User level: read-only, read-write, admin.

Use this command to display the switch operational mode (Layer 2 or Layer 3). The syntax for this command is:

show device-mode

Example:

C460-1>show device-mode

Device mode is Router

show dot1x

User level: user, privileged, supervisor

Use the show dot1x command to display the system dot1x capabilities, protocol version, and timer values.

The syntax for this command is:

show dot1x

Example:

C460-1>show dot1x mode

PAE Capabilities

Authenticator Only

Protocol Version

1

system-auth-control

disabled

***Warning : Authentication server ( RADIUS ) is disabled/not-exist and so

***no authentication can be made

show dot1x statistics

User level: read-only, read-write, admin.

Use the show dot1x statistics command to display Rx and Tx EAPOL and EAP statistics.

The syntax for this command is:

show dot1x statistics

150

Avaya C460 Reference Guide

Page 162
Image 162
Avaya manual Show device-mode, C460-1show device-mode, C460-1show dot1x mode