Avaya manual Set port redundancy enabledisable, C460-1#set port redundancy enable

Chapter 2 Avaya C460 CLI Commands

port	Number of the port on the module. If you do not specify a
	number, all the ports on the module are shown.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
priority	The priority level for powering the port:
	•	Critical
	•	High
	•	Low

Example:

To enable PoE on ports 1 to 3 of module three to High:

C460-1# set port powerinline 3/1-3 high

Load detection process on ports 3/1-3 was set to High

set port redundancy

User level: read-write, admin.

Use the set port redundancy command to globally enables or disable the redundancy pairs you have defined. Using this command will not delete existing redundancy entries.

Disable Spanning Tree before you can enable redundancy.

The syntax for this command is:

set port redundancy {enabledisable}

Example:

C460-1#set port redundancy enable

All redundancy schemes are now enabled

114 Avaya C460 Reference Guide