Avaya C460-1#set port speed 4/1 100MB, Set port static-vlan, C460-1#set port static-vlan 3/4-6

Chapter 2 Avaya C460 CLI Commands

port	Number of the port on the module. If you do not specify a
	number, the speed is set for all the ports on the module.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.

Example:

To configure port 1 on module 4 to 100 Mbps

C460-1#set port speed 4/1 100MB

Port 4/1 speed set to 100Mbps.

set port static-vlan

User level: read-write, admin.

Use the set port static-vlancommand to assign static VLANs to ports.

The syntax for this command is:

set port static-vlan[module/port range] [vlan num]

module	Number of the module (3-6).
port	Number of the port on the module.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
vlan range	vlan to bind to port
Example:

C460-1#set port static-vlan 3/4-6 2

VLAN 2 is bound to port 3/4

VLAN 2 is bound to port 3/5

VLAN 2 is bound to port 3/6

set port trap

User level: read-write, admin.

Use the set port trap command to enable or disable generic SNMP uplink or downlink traps from a port.

Avaya C460 Reference Guide 119