Chapter 2 Avaya C460 CLI Commands

The default is disabled.

The syntax for this command is:

[no] redistribute <protocol>

protocol

Either Static or OSPF

Example:

Router-1 (configure router:rip) # redistribute ospf

Done!

reset

User level: read-only, read-write, admin.

Use the reset command to restart the system or an individual Supervisor module.

The syntax for this command is:

reset [chassis spvs 1 2]

chassis

• Reset the entire chassis, including the Supervisor and I/O

 

Modules

 

• Reset the hardware

 

• Causes disruption to traffic of 10 to 20 seconds

spvs

• Reset both the Supervisor modules

 

• Minimal disruption to the traffic

1

Reset Supervisor module in slot 1

2

Reset Supervisor module in slot 2

If the Supervisor modules are in Active/Standby configuration, resetting the active supervisor will cause the standby supervisor to take over and become active.

The reset command does not work during configuration saving.

C460-1# reset 1

This command will reset the Active SPV

***Reset *** - do you want to continue (Y/N)? y Reseting Active SPV...

Avaya C460 Reference Guide

73

Page 85
Image 85
Avaya C460 manual Reset