Chapter 2 Avaya C460 CLI Commands

otherwise you will get an error message.

When adding a port to an existing LAG, type the same LAG name, otherwise you will create a new LAG.

The syntax for this command is:

set port channel <port_list> {value} [name]

port_list

A list of ports to be aggregated in the format module/port

value

on – enable a channel for the specified module port

 

off – disable a channel for the specified module port

name

channel name

(Optional)

 

 

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

Example:

C460-1#set port channel 4/6,18 on server2

Port 4/6 channel mode set to on

Port 4/18 was added to channel

set port classification

User level: read-write, admin.

Use the set port classification command to set the port classification to either regular or valuable. Any change in the Spanning Tree state from Forwarding for a valuable port will erase all learnt MAC addresses in the switch.

The syntax for this command is:

set port classification [module/port] {regular valuable}

module port

module/port range

regular valuable

port classification

Example:

 

C460-1#set port classification 2/19 valuable

Port 2/19 classification has been changed.

100

Avaya C460 Reference Guide

Page 112
Image 112
Avaya C460-1#set port channel 4/6,18 on server2, Set port classification, C460-1#set port classification 2/19 valuable