Chapter 2 Avaya C460 CLI Commands
The syntax for this command is:
set outband negotiation {enable disable}
enable | Enable link negotiation protocol. |
disable | Disable link negotiation protocol. |
Example: |
|
C460-1# set outband negotiation enable
set outband speed
User level: read-write, admin.
Use the set outband speed command to configure the speed of Ethernet Console port.
In auto negotiation mode, the port's speed is determined by auto negotiation. If you attempt to set the speed when auto negotiation is enabled, the following message is displayed “Auto negotiation is Enable, can not set the speed mode.”
The syntax for this command is:
set outband speed <speed>
speed | • | 10MB |
| • | 100MB |
Example:
C460-1# set outband speed 100MB
Speed for outband port set successfully
set policy type
User level: read-write, admin.
Use the set policy type command to set whether the C460 switch enforces the active
Avaya C460 Reference Guide | 97 |
