Avaya C460 manual

Chapter 2 Avaya C460 CLI Commands

The syntax for this command is:

set spantree max-age <seconds>

max-age The max age time in seconds to keep message information before it is discarded. Value ranges between 6 to 40; value must be between 2 X (Bridge-Hello-Time + 1) and 2 X (Bridge-Forward-Delay - 1).

Recommended value is 20 sec.

Example:

C460-1#set spantree max-age 20

bridge max age is set to 20.

set spantree priority

User level: read-write, admin.

Use the set spantree priority command to set the bridge priority for STP.

The syntax for this command is:

set spantree priority <bridge_priority>

bridge_priority Number representing the priority of the bridge with a priority level from 0 to 65535.

0 indicates high priority and 65535 indicates low priority.

Example:

C460-1#set spantree priority 4096

Bridge priority set to 4096.

set spantree tx-hold-count

User level: read-write, admin.

Use the set spantree tx-hold-countcommand to limit the maximum number of BPDUs transmitted during a hello-time period.

The syntax for this command is:

set spantree tx-hold-count <rate>

rate Value between 1 to 10; recommended value is 3

Avaya C460 Reference Guide 133