Chapter 2 Avaya C460 CLI Commands
Example:
C460-1(super)# line 5 “C460 CLI”
Done!
network (RIP)
User level: read-write, admin.
You can only access this command in
Type router rip at the command prompt to enter
Use the network command to specify a list of networks on which the RIP is running.
Use the no network command to remove an entry.
The syntax for this command is:
[no] network
ip addr | The IP address of the network of directly connected networks |
Wildcard mask address. Exists for compatibility with P550. |
Example:
To specify that RIP will be used on all interfaces connected to the network 192.168.37.0:
Done!
network (OSPF)
User level: read-write, admin.
You can only access this command in
Type router ospf at the command prompt to enter Router
Use the network command to enable OSPF in this network.
Use the no network command to disable OSPF in this network.
The default is disabled.
Avaya C460 Reference Guide | 67 |
