Chapter 2 Avaya C460 CLI Commands
The syntax for this command is:
set ppp incoming timeout <time>
time | The timeout in minutes |
Example:
C460-1# set ppp incoming timeout 15
PPPincoming session will automatically disconnect after 15 minutes of idle time
qset radius authentication enable/disable
User level: read-write, admin.
Enables or disables RADIUS authentication for the C460 switch.
The syntax for this command is:
set radius authentication {enable disable}
enable | Enable RADIUS authentication |
disable | Disable RADIUS authentication (default) |
Example:
C460-1(super)# set radius authentication enable
set radius authentication retry-number
User level: read-write, admin.
Sets the number of times an access request is sent when there is no response.
The syntax for this command is:
set radius authentication retry-number <number>
number | Number of retries |
Example:
C460-1(super)# set radius authentication retry-number 3
124 | Avaya C460 Reference Guide |
