Chapter 2 Avaya P460 CLI Commands
set snmp retries
User level: read-write, admin.
Use the set snmp retries command to set the number of retries initiated by the P460 Manager when it tries to send SNMP messages to the switch.
The syntax for this command is:
set snmp retries <number>
number | Number of retries |
Example:
P460-1# set snmp retries 10
SNMP retries is set to 10
set snmp timeout
User level: read-write, admin.
Use the set snmp timeout command to set the SNMP timeout in seconds. This command is useful for access using the P460 Manager.
The syntax for this command is:
set snmp timeout <number>
number | Timeout in seconds |
Example:
P460-1# set snmp timeout 2000
the SNMP Timeout is set to 2000
set snmp trap
User level: read-write, admin.
Use the set snmp trap command to add an entry into the SNMP trap receiver table and to enable or disable the different SNMP traps for a specific receiver.
First add the rcvr_addr and then enable/disable the different traps for it.
The syntax for this command is:
set snmp trap <rcvr_addr>
110 | Avaya P460 Reference Guide |
