Chapter 2 Avaya P460 CLI Commands

necessary.

Use the set qos dscp-cos-mapcommand to configure the DSCP table.

The syntax for this command is:

set qos dscp-cos-map <dscp1>[-<dscp2>] <operation> [<precedence>]

dscp1

dscp range min (0-63)

dscp

dscp range max (0-63)

operation

fwd0-7 no-change

precedence

mandatory optional

Example:

 

Router-1(configure)#set qos dcsp-cos-map 9-16 fwd3

set qos dscp-name

User level: read-write, admin.

You can only access this command in Configure mode.

Type configure at the command prompt to enter Configure mode if necessary.

Use the set qos dscp-namecommand to configure the DSCP entry name.

The syntax for this command is:

set qos dscp-name <dscp> <name>

dscp1

dscp entry (0-63)

name

entry name

Example:

 

 

 

Router-1(configure)#

set qos dscp-name 10 special

 

 

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

104

Avaya P460 Reference Guide

Page 114
Image 114
Cambridge SoundWorks P460 manual Set qos dscp-cos-map dscp1-dscp2 operation precedence, Set qos dscp-name