Chapter 2 Avaya P460 CLI Commands
set allowed managers ip
User level: read-write, admin.
Use the set allowed manager ip command to add or remove an IP address from the Allowed Managers table. The Allowed Managers table can contain up to twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add delete][IP address]
add | Add specified IP address to the Allowed Managers |
| table |
delete | Deletes specified IP address from the Allowed |
| Managers table |
IP address | IP address to be added or remove |
Example: |
|
P460-1(super)# set allowed managers ip add 149.49.32.134
Ip was added to the table
set arp-aging-interval
User level: read-write, admin.
Use the set
The MAC value for the default gateway of the agent in the ARP table, is deleted at the end of every aging interval. The default value is 10 minutes.
The syntax for this command is:
set arp-aging-interval <value>
value | The number representing the interval, from |
Example:
P460-1# set arp-aging-interval 10
ARP table aging interval for gateways was set to 10 minutes.
72 | Avaya P460 Reference Guide |
