Chapter 2 Avaya P460 CLI Commands

disable

Netbios packets are not rebroadcasted into or out of

 

this interface.

Example:

To enable rebroadcasting of netbios packets received by and sent from the interface “marketing”:

Router-1(config-if:marketing)# ip netbios-rebroadcast both

ip netmask-format

User level: read-write, admin.

You can only access this command in configure mode.

Type configure at the command prompt to enter configure mode.

Use the ip netmask-formatcommand to specify the format of netmasks in the show command output.

Use the no ip netmask-formatcommand to restores the default format which is a dotted decimal.

The syntax for this command is:

[no] ip netmask-format <mask-format>

The possible mask formats are:

bitcount

Addresses are followed by a slash and the total number of bits

 

in the netmask. For example 17

decimal

The network masks are in dotted decimal notation. For

 

example, 255.255.255.0.

hexadecimal

The network masks are in hexadecimal format as indicated by

 

the leading 0X. For example, 0XFFFFFF00.

Example:

To display netmasks in decimal format:

Router-1(configure)#ip netmask-format bitcount decimal

Done!

42

Avaya P460 Reference Guide

Page 52
Image 52
Cambridge SoundWorks P460 manual Ip netmask-format, No ip netmask-format mask-format