
Chapter 2 Avaya P460 CLI Commands
ip ospf authentication-key
User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if necessary.
Use the ip ospf
Use the no ip ospf
The syntax for this command is:
[no] ip ospf authentication-key <key>
key | string (up to 8 characters) |
Example:
key my_pass
ip ospf cost
User level: read-write, admin.
You can only access this command in Interface mode.
Type interface [name] at the command prompt to enter Interface mode if necessary.
Use the ip ospf command to configure interface metric.
Use the no ip ospf cost command to set the cost to its default. The default is 1.
The syntax for this command is:
[no] ip ospf cost <cost>
costinteger
Example:
Done!
Avaya P460 Reference Guide | 43 |