Cambridge SoundWorks P460-1#set trunk 3/3 dot1q, Set vlan, P460-1#set vlan 3 name gregory

Chapter 2 Avaya P460 CLI Commands

port	Number of the port on the module. If you do not specify a
	number, all the ports on the module are set.
	You can also specify a range of ports separated by a dash,
	for example, 4/5-13 for ports 5 to 13 on module 4.
off	Forces the port to become a non-tagging port and persuade
(Optional)	the neighboring port to become a non-tagging port. The
	port becomes a non-tagging port even if the neighbor port
	does not agree to become a non-tagging port.
dot1q	Specifies an IEEE 802.1Q tagging on a Fast Ethernet or
(Optional)	Gigabit Ethernet port.
Example:

P460-1#set trunk 3/3 dot1q

Dot1Q VLAN tagging set on port 3/3.

set vlan

User level: read-write, admin.

Use the set vlan command to configure VLANs.

The syntax for this command is:

set vlan <vlan-id> [name <vlan-name>]

vlan-id	vlan number
vlan-name	vlan name
Example:

P460-1#set vlan 3 name gregory

VLAN id 3, vlan-name gregory created.

If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.

Avaya P460 Reference Guide 117