Chapter 2 Avaya P460 CLI Commands
Example:
show ip arp | Display all ARP mapping |
show ip arp marketing | Display interface ARP mapping |
show ip arp 192.168.49.1 | Display one host ARP mapping |
show ip arp 192.168.49.1 255.255.255.0 Display range of ARP mapping
show | ip | arp | marketing_vlan | Display | vlan ARP mapping |
show | ip | arp | static | Display | static ARP mapping |
If you wish to define a name which includes spaces, you must enclose the entire name in quotation marks, for example “new york”.
show ip icmp
User level: read-only, read-write, admin.
Use the show icmp ip command to display the status of ICMP error messages.
The syntax for this command is:
show ip icmp
Example:
Router-1> show ip icmp
ICMP error messages status is ENABLE
show ip interface
User level: read-only, read-write, admin.
Use the show ip interface command to display information for an IP interface.
The syntax for this command is:
show ip interface
The name of the interface whose information you | |
| want to display. |
The IP address of the interface whose information | |
| you want to display. |
vlan | The name or ID of the VLAN over which there are |
| interfaces you want to display. |
132 | Avaya P460 Reference Guide |
