Chapter 2 Avaya P460 CLI Commands
142 Avaya P460 Reference Guide
show ip unicast cache summary
User level: read-only, read-write, admin.
Use the show command to display the number of host networks and next-hops in
the module’s unicast cache.
The syntax for this command is:
show ip unicast cache summary
Example:
show ip vrrp
User level: read-only, read-write, admin.
Use the show vrrp command to display VRRP information.
The syntax for this command is:
show ip vrrp [<vlan> [router-id <vr-id>]][detail]
Example:
Router-1> show ip unicast cache summary
Cache Summary
===============
Hosts : 71
Networks : 24
Next-Hops : 37
vlan Filter by VLAN.
router-id Filter by virtual router ID (1-255)
vr-id The virtual router ID.
detail Provide detailed information.
Router-1> show ip vrrp
VRRP is globally enabled
VLAN VRID IP Address PriTimer State Since
------ ----------------------------------------------------
1 1 192.168.66.23 255 1 MASTER 00:00:00
1 2 192.168.66.24 100 1 BACKUP 00:00:00