Chapter 2 Avaya P460 CLI Commands
Example:
P460-1> show timezone
Timezone set to 'GMT', offset from UTC is 0 hours
show trunk
User level: read-only, read-write, admin.
Use the show trunk command to display VLAN tagging information for the switch.
The syntax for this command is:
show trunk
module |
| Number of the module. If you do not specify a number, all | |
(Optional) | modules are shown. |
| |
port |
| Number of the port on the module. If you do not specify a | |
(Optional) | number, all ports on the specificity module are shown. | ||
|
| You can specify a port range. |
|
Example: |
|
| |
|
| ||
|
| ||
Port | Mode | Binding mode | Native vlan |
41/1 | off | statically bound | 1 |
41/2 | dot1q | statically bound | 2 |
|
|
| |
Output Fields: |
|
| |
Field |
| Description |
|
Port |
| Switch and port number(s) |
|
Mode |
| Tag status of the port (dot1q - dot1Q tagging mode, | |
|
| off - clear mode). |
|
Binding mode | Binding mode of the port |
| |
Native VLAN | Number of the Port VLAN ID (the VLAN to which received | ||
|
| untagged traffic will be assigned). |
|
Avaya P460 Reference Guide | 179 |
