Cambridge SoundWorks P460 manual No ip rip poison-reverse, Ip rip rip-version, Ip rip send-receive

Chapter 2 Avaya P460 CLI Commands

The syntax for this command is:

[no] ip rip poison-reverse

Example:

Router-1(configure-if:marketing) # ip rip poison-reverse

Done!

ip rip rip-version

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip rip rip-versioncommand to specify the RIP version running on the interface basis.

The syntax for this command is:

ip rip rip-version [1][2]

The possible versions of the RIP packets received and sent on an interface are:

[1]RIP Version 1 packets

[2]RIP Version 2 packets.

Example:

To specify that RIP version 2 should be running on the basis of the interface “marketing”:

Router-1(configure-if:marketing) # ip rip rip-version 2

Done!

ip rip send-receive

User level: read-write, admin.

You can only access this command in interface mode.

Type interface [name] at the command prompt to enter interface mode if necessary.

Use the ip rip send-receiveon an interface. The default state is

command to set the RIP Send and Receive mode talk-listen.

Avaya P460 Reference Guide 49