
Chapter 2 Avaya P460 CLI Commands
Use the ip routing command to enable IP routing.
Use the no ip routing command to disable the IP routing process in the device. By default, IP routing is enabled.
The syntax for this command is:
[no] ip routing
Example:
Router-1(configure)# ip routing
Done!
ip routing-mode
User level: read-write, admin.
You can only access this command in interface mode.
Type interface [name] at the command prompt to enter interface mode.
Use the ip
The IP address used in MSNM is the primary management interface IP address. Only one interface can be in RT_PRIMARY_MGMT mode. If no interface is configured to RT_PRIMARY_MGMT, the IP address used in MSNM is selected randomly.
The syntax for this command is:
ip routing-mode <mode>
mode | RT_MGMT or RT_PRIMARY_MGMT mode |
Example:
RT_PRIMARY_MGMT
ip simulate
User level: read-write, admin.
You can only access this command in Configure mode.
Type configure at the command prompt to enter Configure mode if
52 | Avaya P460 Reference Guide |