Cambridge SoundWorks P460 Show port vlan-binding-mode module/port, Show ppp authentication

Chapter 2 Avaya P460 CLI Commands

show port vlan-binding-mode

User level: read-only, read-write, admin.

Use the show port-vlan-bindingcommand to display port vlan binding mode information.

The syntax for this command is:

show port vlan-binding-mode [module[/port]]

module	Number of the module (3-6). If you do not specify a number,
	the ports on all the modules are shown.
port	Number of the port on the module. If you do not specify a
(Optional)	number, all the ports on the module are shown.
	You can also specify a range of ports separated by a dash, for
	example, 4/5-13 for ports 5 to 13 on module 4.
Example:

P460-1>show port vlan-binding-mode port 2/1 is statically bound

port 2/2 is statically bound port 2/3 is statically bound port 2/4 is statically bound port 2/5 is statically bound port 2/6 is statically bound port 2/7 is statically bound port 2/8 is statically bound port 2/9 is statically bound port 2/10 is statically bound

show ppp authentication

User level: read-only, read-write, admin.

Use the show ppp authentication command to display the authentication method used for PPP sessions.

The syntax for this command is:

show ppp authentication

164 Avaya P460 Reference Guide