Chapter 2 Avaya P460 CLI Commands
show snmp retries
User level: read-only, read-write, admin.
Use the show snmp retries command to display the number of retries initiated by the P460 Manager when it tries to send SNMP messages to the device.
The syntax for this command is:
show snmp retries
Example:
P460-1> show snmp retries
the SNMP Retries Number is 3
show snmp timeout
User level: read-only, read-write, admin.
Use the show snmp timeout command to display the default SNMP timeout in seconds.
Tip: This command is useful for access using the Device Manager.
The syntax for this command is:
show snmp timeout
Example:
P460-1> show snmp timeout
the SNMP Timeout is 2000
show spantree
User level: read-only, read-write, admin.
Use then show spantree command to display
The syntax for this command is:
show spantree [<module>[/<port>]]
module | Number of the module. If you do not specify a number, all |
(Optional) | modules are shown. |
Avaya P460 Reference Guide | 171 |