Chapter 2 Avaya P460 CLI Commands
The syntax for this command is:
line <number> [string]
number | Line number in the banner (1...24) |
string | String to be displayed at the given line number (up to 80 |
| characters) |
Example: |
|
P460-1(super)# line 5 “P460 CLI”
Done!
network
User level: read-write, admin.
You can only access this command in
Type router rip at the command prompt to enter
Use the network command to specify a list of networks on which the RIP is running.
Use the no network command to remove an entry.
The syntax for this command is:
[no] network
ip addr | The IP address of the network of directly connected networks |
Wildcard mask address. Exists for compatibility with P550. |
Example:
To specify that RIP will be used on all interfaces connected to the network 192.168.37.0:
Done!
network (Layer 3)
User level: read-write, admin.
You can only access this command in
Avaya P460 Reference Guide | 59 |
