Chapter 2 Avaya P460 CLI Commands

cause a loop.

The syntax for this command is:

set port spantree cost [module/port] [value]

module/port

Module number/port number.

value

Number representing the cost. The cost level is set from 1

 

to 65535. A lower cost (lower value) specifies precedence

 

of a port to forward traffic.

Example:

 

P460-1>set port spantree cost 4/2 4096

port 4/2 spantree cost is 4096

set port spantree priority

User level: read-write, admin.

Use the set port spantree command to set the Spanning Tree priority level of a port. This value defines the priority of a port to be blocked in case two ports with the same costs cause a loop.

The syntax for this command is:

set port spantree priority [module/port] [value]

module/port

Module number/port number.

value

Number representing the priority of the port. The priority

 

level is from 0 to 255, with 0 indicating high priority and

 

255 indicating low priority. A port with a lower priority

 

will be blocked.

Example:

 

P460-1#set port spantree priority 3/4 128

port 3/4 spantree priority is 128

set port speed

User level: read-write, admin.

Use the set port speed command to configure the speed of a port or range of

Avaya P460 Reference Guide

97

Page 107
Image 107
Cambridge SoundWorks manual Set port spantree cost module/port value, P460-1set port spantree cost 4/2